CRA220-8
(rev. 1.0)

Discontinued

SAS 6Gb/s card
  • Add-on SAS card for the MD30-RS0, MD50-LS0 and MD60-SC0 boards
  • Supports SAS / Enterprise SATA hard drives
  • LSI SAS 2308
  • Mezzanine card Type T (Gen3 x8 bus)
  • 163.94 x 38.83 mm

SPECIFICATIONS

Ports
-
Controller
LSI SAS 2308
RAID
Firmware RAID 0/1/1E/10
Interface
PCIe Gen3 x8 bus
Dimension
163.94 x 38.83 mm
Format
Mezzanine T type card
Ordering Information
9CRA2208NR-00
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
{{ selectedProductCount }}
Compare
  • {{ selectedProducts[index].modelName }}
Clear All
Back
You may only add up to 4 items for comparison at one time.