1. 首頁
  2. 個人應用
  3. 固態硬碟 (SSD)
  4. AORUS Gen4 7300 SSD 2TB (w/o heat spreader)

AORUS Gen4 7300 SSD 2TB (w/o heat spreader)

AG4732TB N

特色重點

Top Gen4 SSD Performance
7300 MB/s Seq. Experience the Fury of Speed.
Extremely fast PCIe 4.0 throughput
AORUS Gen4 7300 SSD delivers sequential read up to 7.3GB/s with 8 Channel controller- Phison E18- and 3D TLC NAND. The E18 controller is built with the advanced 12nm process ensuring sufficient computing power. Also it supports up to 8 NAND Flash channel with 32CE, DDR4 SLC caching and meets NVMe 1.4.
* Performance may vary based on system hardware & configuration.
** Test system configuration: AM5 X670(AMD Ryzen 9)
  • + PCIe 4.0x4, NVMe 1.4 Interface
  • + DDR4 DRAM cache
  • + 8 CH with 32 CEs
  • + Supports SMART and TRIM
  • + Support AES-256 Encryption
NAND Flash Selected for High Quality and Performance
Selected High Speed 3D TLC NAND Flash (1600+ MT/s)
The ultra high speed 3D TLC NAND Flash is operating at 1600+ MT/s, which is 50% more than the prevision version that leads to better performance.
2X
1600+ MT/s
NAND Flash Speed (MT/s)
Xtreme Storage Performance
By adopting Phison E18 controller and 3D TLC NAND, AORUS Gen4 7300 SSD delivers blazing speeds: up to 7,300 MB/s for sequential read, and up to 6,850MB/s sequential write. Sequential Read performance of PCIe 4.0 SSDs is 2 times faster than the PCIe 3.0 SSDs. Get ready to enter the next generation of computing with faster and smoother, gaming, streaming, and graphics intensive rendering.
Sequential Read Speed
AORUS Gen4 7300 SSD
Normal PCIe 3.0 SSD
Performance (MB/s)
7300
3500
Sequential Write Speed
AORUS Gen4 7300 SSD
Normal PCIe 3.0 SSD
Performance (MB/s)
6850
3300
GIGABYTE CONTROL CENTER (GCC)
GIGABYTE CONTROL CENTER (GCC) is a unified software for all GIGABYTE supported products. It provides newly designed intuitive user interface to control all essential function.
  1. Unified software platform for all Gigabyte supported products
  2. Intuitive user interface for an eased experience
  3. Modularized control components only for installed hardware
  4. Auto update function to keep system up to date and support future products
Quality Guaranteed
Extreme Performance
Comes From High Standard Test
Dimension
Model list
Capacity* Model Sequential Read MB/s** Sequential Write MB/s**
1000GB AORUS Gen4 7300 SSD 1TB
(w/o heat spreader)
(AG4731TB N)
7300 MB/s 6000 MB/s
2000GB AORUS Gen4 7300 SSD 2TB
(w/o heat spreader)
(AG4732TB N)
7300 MB/s 6850 MB/s
* Note: 1GB = 1 billion bytes. Real useable capacity may vary by models.
** Speeds based on internal testing. Real performance may vary by models.
Key Feature
  • Form Factor: M.2 2280
  • Interface: PCI-Express 4.0 x4, NVMe 1.4
  • Total Capacity: 2000GB*
  • Sequential Read Speed : up to 7300 MB/s**
  • Sequential Write speed : up to 6850 MB/s**
  • Wear Leveling, Over-Provision technologies
  • TRIM & S.M.A.R.T supported
  • AES-256 Supported
  • Warranty: Limited 5-years

*Note: 1GB = 1 billion bytes. Actual useable capacity may vary.
**Speeds based on internal testing. Actual performance may vary.
* 實際出貨規格及產品外觀依各國家地區可能有所不同,我們誠摯的建議您與當地的經銷商或零售商確認目前販售的產品規格及樣式。
* 產品顏色可能會因拍照光線誤差或螢幕設定而與實際產品有所差異。
* 我們會盡力提供正確與完整的資料於網頁上,並保留更動、修正頁面資訊的權利,恕不另行通知。

產品規格

* 產品規格會依各國家地區出貨而有所變動,應以各地實際出貨狀況為準。誠摯建議與當地經銷商或零售商確認最新產品販售規格。
* 以上產品之規格、圖片及其他資訊僅供參考,如與實際產品有任何不相符之處,應以實際產品為準。技嘉科技保留在任何時間做出修改之權利。對任何因使用上述資料而引致之損失,技嘉科技概不承擔任何責任。
* 本產品所標示之各項效能表現為各晶片廠商或各制定介面官方組織所提出的最大理論值,實際效能可能因規格及設備而有所不同。
* 本文中所使用之各項商標及企業識別圖示,均為其合法所有人之財產。
* 基於PC基本架構,有部分記憶體空間須留作系統用途,故所偵測到之記憶體大小會比實際上較少。

支援與下載