AI TOP 100E SSD 320GB
AI100E320G-2B
Specifications
- Interface
- PCI-Express 4.0x4, NVMe 1.4
- Form Factor
- M.2 2280
- Total Capacity
- 320GB
- NAND
- 3D NAND Flash
- External DDR Cache
- LPDDR4 1GB
- Sequential Read speed
- Up to 7,200 MB/s
- Sequential Write speed
- Up to 5,800MB/s
- Dimension
- 22 x 2.3 x 80 mm
- Mean time between failure (MTBF)
- 1.6 million hours
- Max. Operating Power
- Read: 10.1W; Write: 9.5W
- Power Consumption (Idle, PS3)
- 30mW
- Power Consumption(PS4, L1.2)
- 3mW
- Temperature (Operating)
- 0°C to 70°C
- Temperature (Storage)
- -40°C to 85°C
- Warranty
- 1. Limited 5-years or 28,000TBW.
2. Limited warranty based on 5 years or 28,000TBW, whichever comes first. (*TBW is evaluated by AI finetuning workload )
*TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail.
3. When the usage of an NVME SSD as indicated by the "Percentage Used" (SMART ID: 05) reaches 100 means out of warranty. (A new unused product will show the number of 0)
- Note
- • Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
• Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark.
• Speeds based on internal testing. Actual performance may vary.
• 1GB = 1 billion bytes. Actual useable capacity may vary.
- Interface
- PCI-Express 4.0x4, NVMe 1.4
- Form Factor
- M.2 2280
- Total Capacity
- 320GB
- NAND
- 3D NAND Flash
- External DDR Cache
- LPDDR4 1GB
- Sequential Read speed
- Up to 7,200 MB/s
- Sequential Write speed
- Up to 5,800MB/s
- Dimension
- 22 x 2.3 x 80 mm
- Mean time between failure (MTBF)
- 1.6 million hours
- Max. Operating Power
- Read: 10.1W; Write: 9.5W
- Power Consumption (Idle, PS3)
- 30mW
- Power Consumption(PS4, L1.2)
- 3mW
- Temperature (Operating)
- 0°C to 70°C
- Temperature (Storage)
- -40°C to 85°C
- Warranty
- 1. Limited 5-years or 28,000TBW.
2. Limited warranty based on 5 years or 28,000TBW, whichever comes first. (*TBW is evaluated by AI finetuning workload )
*TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail.
3. When the usage of an NVME SSD as indicated by the "Percentage Used" (SMART ID: 05) reaches 100 means out of warranty. (A new unused product will show the number of 0)
- Note
- • Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
• Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark.
• Speeds based on internal testing. Actual performance may vary.
• 1GB = 1 billion bytes. Actual useable capacity may vary.
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.