AI TOP 100E SSD 1TB

AI100E1TB / AI100E1TB-2B
Key FeaturesSpecificationsSupportGalleryWhere to Buy

Specifications

  • Interface
  • PCI-Express 4.0x4, NVMe 1.4
  • Form Factor
  • M.2 2280
  • Total Capacity
  • 1024GB
  • NAND
  • 3D NAND Flash
  • External DDR Cache
  • LPDDR4 1GB
  • Sequential Read speed
  • Up to 7,200 MB/s
  • Sequential Write speed
  • Up to 6,500 MB/s
  • Dimension
  • 80 x 22 x 3.5 mm
  • Mean time between failure (MTBF)
  • 1.6 million hours
  • Max. Operating Power
  • Read: 10.8W; Write: 11.0W
  • Power Consumption (Idle, PS3)
  • 30mW
  • Power Consumption(PS4, L1.2)
  • 3mW
  • Temperature (Operating)
  • 0°C to 70°C
  • Temperature (Storage)
  • -40°C to 85°C
  • Warranty
    • 1. Limited 5-years or 109,500TBW.
    • 2. Limited warranty based on 5 years or 109,500TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
      *TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail.
    • 3. When the usage of an NVME SSD as indicated by the ""Percentage Used"" (SMART ID: 05) reaches 100 means out of warranty. (A new unused product will show the number of 0)
    • 4. When the usage of an NVME SSD as indicated by the "Data units written" (SMART ID: 07) reaches “36C0000000” (Hexadecimal) means out of warranty.
  • Note
    • • Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
    • • Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
    • • Speeds based on internal testing. Actual performance may vary.
    • • 1GB = 1 billion bytes. Actual useable capacity may vary.
  • Interface
  • PCI-Express 4.0x4, NVMe 1.4
  • Form Factor
  • M.2 2280
  • Total Capacity
  • 1024GB
  • NAND
  • 3D NAND Flash
  • External DDR Cache
  • LPDDR4 1GB
  • Sequential Read speed
  • Up to 7,200 MB/s
  • Sequential Write speed
  • Up to 6,500 MB/s
  • Dimension
  • 80 x 22 x 3.5 mm
  • Mean time between failure (MTBF)
  • 1.6 million hours
  • Max. Operating Power
  • Read: 10.8W; Write: 11.0W
  • Power Consumption (Idle, PS3)
  • 30mW
  • Power Consumption(PS4, L1.2)
  • 3mW
  • Temperature (Operating)
  • 0°C to 70°C
  • Temperature (Storage)
  • -40°C to 85°C
  • Warranty
    • 1. Limited 5-years or 109,500TBW.
    • 2. Limited warranty based on 5 years or 109,500TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
      *TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail.
    • 3. When the usage of an NVME SSD as indicated by the ""Percentage Used"" (SMART ID: 05) reaches 100 means out of warranty. (A new unused product will show the number of 0)
    • 4. When the usage of an NVME SSD as indicated by the "Data units written" (SMART ID: 07) reaches “36C0000000” (Hexadecimal) means out of warranty.
  • Note
    • • Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
    • • Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
    • • Speeds based on internal testing. Actual performance may vary.
    • • 1GB = 1 billion bytes. Actual useable capacity may vary.
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.

Support