\การสนับสนุน\Consumer\FAQ\
การแก้ปัญหา
การแก้ปัญหา

ค้นหาวิธีแก้ปัญหาและคำถามที่พบบ่อย (FAQ)

May 1, 2013
Can not install Win 2000 with TekramDC-390U2W SCSI CARD ?

Please refer to the following installation steps :
  1. Download the latest driver and bios version 3.23 of Tekram DC-390U2W or later from Tekram's web site. ( http: www.tekram.com.tw )
  2. Flash its bios according to the instruction on Tekram's website and reboot. Press F2 or F6 to enter SCSI bios setting during POST.
  3. Press Enter, then look for "FUNTION SELECTION" item, choose " SET DEVICES OPTIONS " !
  4. Please check and make sure that option " SEND START UNIT COMMAND " of the corresponding channel is set to YES. 
  5. Example: If your SCSI HDD install on Channel 0, pls correspond the third option "send start unit command" and set it to Yes.
  6. Save and exit the bios setting, then reboot. Starting install Win2000; do not press F6 to specify this Tekram SCSI controller, just press enter to continue installation.