WRX90 AI TOP

AMD Socket sTR5, support for AMD Ryzen™ Threadripper™ PRO 9000-WX processors / AMD Ryzen™ Threadripper™ PRO 7000-WX processors (Go to GIGABYTE's website for the latest CPU support list.)

AMD WRX90

Support for DDR5 ECC Registered memory modules (RDIMM/RDIMM-3DS)
8 x DDR5 DIMM sockets supporting up to 2 TB of system memory
- AMD Ryzen™ Threadripper™ PRO 9000-WX/PRO 7000-WX Series Processors support 8-Channel memory architecture
- AMD Ryzen™ Threadripper™ 9000/7000 Series Processors support Quad Channel memory architecture
Support for AMD EXtended Profiles for Overclocking (AMD EXPO™) and Extreme Memory Profile (XMP) memory modules
(The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to "Memory Support List" on GIGABYTE's website for more information.)

1 x AST2600 D-Sub port
2 x USB4® USB Type-C® ports, supporting Type-C and DisplayPort video outputs and a maximum resolution of 3840x2160@240 Hz
* Supports DisplayPort 1.4 and HDR.
** Graphics output specifications depend on the installed graphics card.

Realtek® ALC1220 CODEC
* The back panel Line Out jack supports DSD audio output.
High Definition Audio
2/4/5.1/7.1-channel
* Audio jack functionality and 7.1-channel configuration can be customized in the audio software.
Support for S/PDIF Out

Intel® X710 Dual 10GbE network controller (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps)
Integrated AST2600 BMC and Realtek® 1GbE network controller (1 Gbps/100 Mbps)

1 x microSD card slot (IO_SD_CR1)
1 x PMBus connector (PM_BUS)
2 x LAN LED headers (LAN1_LED/LAN2_LED)
1 x MSG LED header (MSG_LED)
1 X MSG LED (MSG_LED1)
2 x BMC status LEDs (BMC_LED1/BMC_LED3)
1 x IPMB header (BMC_IPMB)
1 x Chassis intrusion header (BMC CSO)
1 x I2C_12 header (I2C_12)
1 x Location LED header (LOCATION)
1 x Location LED (LOC_LED)
1 x VGA switch (VGA_SW)
1 x BMC switch (BMC_SW)
1 x BMC LAN switch (BMC_LAN_SW)
1 x PSU switch (S_PSU_SW)
1 x IPMI switche (IPMI_SW)

6 x PCI Express x16 slots, integrated in the CPU, supporting PCIe 5.0 and running at x16 (PCIEX16_1/PCIEX16_2/PCIEX16_3/PCIEX16_4/PCIEX16_5/PCIEX16_7)
* The PCIe x16 slots support only graphics cards or NVMe SSDs. For single-card configurations, install the graphics card in the PCIEX16_1 slot.
1 x PCI Express x16 slot, integrated in the CPU, supporting PCIe 5.0 and running at x8 (PCIEX8)
1 x M.2 Socket 1 connector for the wireless communication module (M2_WIFI)

1 x MCIO 8i connector (MCIOX8_1), integrated in the CPU, supporting PCIe 5.0 x4/x2 SSDs
* The MCIOX8_1 connector shares bandwidth with M2A_CPU and M2B_CPU. Occupying either M.2 slot disables the MCIOX8_1 connector.
1 x MCIO 8i connector (MCIOX8_2), integrated in the CPU, supporting SATA and PCIe 5.0 x4/x2 SSDs
* This connector defaults to PCIe mode. To enable other options, please navigate to the ""BIOS Setup"" page of GIGABYTE's website.
2 x M.2 connectors (M2A_CPU/M2B_CPU), integrated in the CPU, supporting Socket 3, M key, type 2280 PCIe 5.0 x4/x2 SSDs
1 x M.2 connector (M2C_SB), integrated in the Chipset, supporting Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSDs
4 x SATA 6Gb/s connectors
RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices
RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices

CPU:
4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel
CPU+ASMedia USB4® controller:
2 x USB4® USB Type-C® ports on the back panel
Chipset:
1 x USB Type-C® port with USB 3.2 Gen 2x2 support (internal)
2 x USB 3.2 Gen 2 Type-A ports (red) on back panel
2 x USB 3.2 Gen 1 ports (internal)
Chipset+USB 2.0 Hub:
4 x USB 2.0/1.1 ports (internal)

1 x 24-pin ATX main power connector
2 x 8-pin ATX 12V power connectors
4 x PCIe power connectors
1 x CPU fan header
1 x CPU fan/water cooling pump header
2 x system fan headers
3 x system fan/water cooling pump headers
1 x addressable RGB Gen2 LED strip header
1 x RGB LED strip header
2 x MCIO 8i connectors
3 x M.2 Socket 3 connectors
1 x M.2 Socket 1 connector
4 x SATA 6Gb/s connectors
1 x USB Type-C® header (USB 3.2 Gen 2x2)
1 x USB 3.2 Gen 1 header
2 x USB 2.0/1.1 headers
1 x front panel header
1 x front panel audio header
1 x TPM header (GC-TPM2.0 SPI V2),
1 x serial port header
2 x temperature sensor headers
1 x reset jumper
1 x Clear CMOS jumper

1 x Reset button
1 x Power button
1 x Clear CMOS button
1 x Q-Flash Plus button
2 x USB4® USB Type-C® ports (DisplayPort)
2 x Mini-DisplayPort In ports
1 x Server management LAN port
6 x USB 3.2 Gen 2 Type-A ports (red)
1 x D-Sub port
2 x RJ-45 ports
2 x audio jacks
1 x optical S/PDIF Out connector

iTE® I/O Controller Chip

Voltage detection
Temperature detection
Fan speed detection
Water cooling flow rate detection
Fan fail warning
Fan speed control

* Fan or pump speed control depends on the installed fan or pump model.

1 x 256 Mbit flash
Licensed AMI UEFI BIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Support for GIGABYTE Control Center (GCC)
Support for Q-Flash
Support for Q-Flash Plus
Support for native BMC software functionality
Support for AI TOP Utility (Ubuntu)

Norton® Internet Security (OEM version)

Support for Ubuntu 24.04 LTS
Support for Windows 11 64-bit

E-ATX; 30.5cm x 33.0cm