Particuliers Entreprises
  1. Accueil
  2. Particuliers
  3. Carte Mère
  4. GA-X58A-OC

GA-X58A-OC (Rev. 1.0)

Intel® X58 + ICH10R Chipset
GénéralitésSpécificationsSupportActualité / RécompensesEn savoir plusWhere to Buy

Spécifications

  • Processeur
    1. Support for an Intel® Core™ i7 series processor in the LGA1366 package
    2. L3 cache varies with CPU
    (Please refer "CPU Support List" for more information.)
  • QPI
    1. 4.8GT/s, 6.4GT/s
  • Chipset
    1. North Bridge: Intel® X58 Express Chipset
    2. South Bridge: Intel® ICH10R
  • Mémoire
    1. 6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory
      * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
    2. 3/Dual channel memory architecture
    3. Support for DDR3 2200/1333/1066/800 MHz memory modules
    4. Support for non-ECC memory modules
    5. Support for Extreme Memory Profile (XMP) memory modules
    (Please refer "Memory Support List" for more information.)
  • Audio
    1. Realtek ALC889 codec
    2. High Definition Audio
    3. 2/4/5.1/7.1-channel
      * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
    4. Support for S/PDIF Out
  • Réseau
    1. 1 x Realtek RTL8111E chip (10/100/1000 Mbit)
  • Port d'expansion
    1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.

    2. 2 x PCI Express x16 slot, running at x8 (PCIEX8_1, PCIEX8_2)
      * The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2 slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate at up to x8 mode when the PCIEX8_1/PCIEX8_2 is populated.
      (The PCIEX16_1, PCIEX16_2, PCIEX8_1, and PCIEX8_2 slots conform to PCI Express 2.0 standard.)

    3. 1 x PCI slot
  • Technologie Multi-cartes graphiques
    1. Support for 3-Way/2-Way NVIDIA SLI technology and 4-Way/3-Way/2-Way ATI CrossFireX™ technology
  • Interface de Stockage
  • South Bridge:
    1. 6 x SATA 3Gb/s connectors (SATA2_0~SATA2_5) supporting up to 6 SATA 3Gb/s devices
    2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
    1 x Marvell 88SE9182 chip:
    1. 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
    2. Support for SATA RAID 0 and RAID 1
  • USB
  • South Bridge:
    1. Up to 4 USB 2.0/1.1 ports (2 on the back panel, 2 via the USB bracket connected to the internal USB header)
    1 x Etron EJ168 chip:
    1. Up to 2 USB 3.0/2.0 ports on the back panel
      * The USB 2.0 signals of the USB 3.0/2.0 ports on the back panel are from the South Bridge.
  • Connecteurs d'entrées/sorties internes
    1. 1 x 24-pin ATX main power connector
    2. 2 x 8-pin ATX 12V power connectors
    3. 2 x PCIe power connectors
    4. 2 x SATA 6Gb/s connectors
    5. 6 x SATA 3Gb/s connectors
    6. 1 x CPU fan header
    7. 6 x system fan headers
    8. 1 x North Bridge fan header
    9. 1 x front panel header
    10. 1 x front panel audio header
    11. 1 x S/PDIF Out header
    12. 1 x USB 2.0/1.1 header
    13. 2 x heatsink LED power connectors
    14. 1 x clearing CMOS button
    15. 1 x power button
    16. 1 x reset button
    17. 1 x PWM frequency switch
    18. 1 x onboard voltage measurement module
    19. 1 x 4G Ready button
    20. 1 x OC Gear button
    21. 1 x CPU BCLK Down button
    22. 1 x CPU BCLK Up button
    23. 1 x CPU Ratio Down button
    24. 1 x CPU Ratio Up button
    25. 1 x BIOS switch
  • Connecteur du Panneau Arrière
    1. 1 x PS/2 keyboard port
    2. 1 x PS/2 mouse port
    3. 2 x USB 2.0/1.1 ports
    4. 2 x USB 3.0/2.0 ports
    5. 1 x RJ-45 port
    6. 3 x audio jacks (Line In/Mic In/Line Out)
  • Contrôleur d'Entrée/Sortie
    1. iTE IT8720 chip
  • Monitorage Matériel
    1. System voltage detection
    2. CPU/System temperature detection
    3. CPU/System fan speed detection
    4. CPU overheating warning
    5. CPU/System fan fail warning
    6. CPU/System fan speed control
      * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
  • BIOS
    1. 2 x 16 Mbit flash
    2. Use of licensed AWARD BIOS
    3. Support for DualBIOS™
    4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
  • Fonctionnalités Exclusives
    1. Support for @BIOS
    2. Support for Q-Flash
    3. Support for Xpress BIOS Rescue
    4. Support for Download Center
    5. Support for Xpress Install
    6. Support for Xpress Recovery2
    7. Support for EasyTune
      * Available functions in EasyTune may differ by motherboard model.
    8. Support for Smart 6™
    9. Support for Auto Green
    10. Support for eXtreme Hard Drive (X.H.D)
    11. Support for ON/OFF Charge
    12. Support for Cloud OC
    13. Support for Q-Share
  • Logiciels Fournis
    1. Norton Internet Security (OEM version)
  • Système d'Exploitation
    1. Support for Microsoft® Windows® 7/Vista/XP
  • Dimensions
    1. E-ATX Form Factor; 30.5cm x 26.4cm
  • Remarque
    1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
    2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.
    • Processeur
      1. Support for an Intel® Core™ i7 series processor in the LGA1366 package
      2. L3 cache varies with CPU
      (Please refer "CPU Support List" for more information.)
    • QPI
      1. 4.8GT/s, 6.4GT/s
    • Chipset
      1. North Bridge: Intel® X58 Express Chipset
      2. South Bridge: Intel® ICH10R
    • Mémoire
      1. 6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory
        * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
      2. 3/Dual channel memory architecture
      3. Support for DDR3 2200/1333/1066/800 MHz memory modules
      4. Support for non-ECC memory modules
      5. Support for Extreme Memory Profile (XMP) memory modules
      (Please refer "Memory Support List" for more information.)
    • Audio
      1. Realtek ALC889 codec
      2. High Definition Audio
      3. 2/4/5.1/7.1-channel
        * To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
      4. Support for S/PDIF Out
    • Réseau
      1. 1 x Realtek RTL8111E chip (10/100/1000 Mbit)
    • Port d'expansion
      1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.

      2. 2 x PCI Express x16 slot, running at x8 (PCIEX8_1, PCIEX8_2)
        * The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2 slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate at up to x8 mode when the PCIEX8_1/PCIEX8_2 is populated.
        (The PCIEX16_1, PCIEX16_2, PCIEX8_1, and PCIEX8_2 slots conform to PCI Express 2.0 standard.)

      3. 1 x PCI slot
    • Technologie Multi-cartes graphiques
      1. Support for 3-Way/2-Way NVIDIA SLI technology and 4-Way/3-Way/2-Way ATI CrossFireX™ technology
    • Interface de Stockage
    • South Bridge:
      1. 6 x SATA 3Gb/s connectors (SATA2_0~SATA2_5) supporting up to 6 SATA 3Gb/s devices
      2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
      1 x Marvell 88SE9182 chip:
      1. 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
      2. Support for SATA RAID 0 and RAID 1
    • USB
    • South Bridge:
      1. Up to 4 USB 2.0/1.1 ports (2 on the back panel, 2 via the USB bracket connected to the internal USB header)
      1 x Etron EJ168 chip:
      1. Up to 2 USB 3.0/2.0 ports on the back panel
        * The USB 2.0 signals of the USB 3.0/2.0 ports on the back panel are from the South Bridge.
    • Connecteurs d'entrées/sorties internes
      1. 1 x 24-pin ATX main power connector
      2. 2 x 8-pin ATX 12V power connectors
      3. 2 x PCIe power connectors
      4. 2 x SATA 6Gb/s connectors
      5. 6 x SATA 3Gb/s connectors
      6. 1 x CPU fan header
      7. 6 x system fan headers
      8. 1 x North Bridge fan header
      9. 1 x front panel header
      10. 1 x front panel audio header
      11. 1 x S/PDIF Out header
      12. 1 x USB 2.0/1.1 header
      13. 2 x heatsink LED power connectors
      14. 1 x clearing CMOS button
      15. 1 x power button
      16. 1 x reset button
      17. 1 x PWM frequency switch
      18. 1 x onboard voltage measurement module
      19. 1 x 4G Ready button
      20. 1 x OC Gear button
      21. 1 x CPU BCLK Down button
      22. 1 x CPU BCLK Up button
      23. 1 x CPU Ratio Down button
      24. 1 x CPU Ratio Up button
      25. 1 x BIOS switch
    • Connecteur du Panneau Arrière
      1. 1 x PS/2 keyboard port
      2. 1 x PS/2 mouse port
      3. 2 x USB 2.0/1.1 ports
      4. 2 x USB 3.0/2.0 ports
      5. 1 x RJ-45 port
      6. 3 x audio jacks (Line In/Mic In/Line Out)
    • Contrôleur d'Entrée/Sortie
      1. iTE IT8720 chip
    • Monitorage Matériel
      1. System voltage detection
      2. CPU/System temperature detection
      3. CPU/System fan speed detection
      4. CPU overheating warning
      5. CPU/System fan fail warning
      6. CPU/System fan speed control
        * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
    • BIOS
      1. 2 x 16 Mbit flash
      2. Use of licensed AWARD BIOS
      3. Support for DualBIOS™
      4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
    • Fonctionnalités Exclusives
      1. Support for @BIOS
      2. Support for Q-Flash
      3. Support for Xpress BIOS Rescue
      4. Support for Download Center
      5. Support for Xpress Install
      6. Support for Xpress Recovery2
      7. Support for EasyTune
        * Available functions in EasyTune may differ by motherboard model.
      8. Support for Smart 6™
      9. Support for Auto Green
      10. Support for eXtreme Hard Drive (X.H.D)
      11. Support for ON/OFF Charge
      12. Support for Cloud OC
      13. Support for Q-Share
    • Logiciels Fournis
      1. Norton Internet Security (OEM version)
    • Système d'Exploitation
      1. Support for Microsoft® Windows® 7/Vista/XP
    • Dimensions
      1. E-ATX Form Factor; 30.5cm x 26.4cm
    • Remarque
      1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
      2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.

      * Les termes HDMI, interface multimédia haute définition HDMI et habillage commercial HDMI, et les logos HDMI sont des marques commerciales et des marques déposées de HDMI Licensing Administrator, Inc.
      * Les informations ici proposées le sont pour référence uniquement. GIGABYTE se réserve le droit de modifier ce contenu à tout moment et sans préavis.
      *Les performances affichées sont basées sur les informations proposées par les constructeurs de chipsets ou sociétés définissant les caractéristiques des interfaces. Performances pouvant varier selon configuration.
      * Marques et logos appartiennent aux détenteurs respectifs de leurs droits.
      * L'architecture de grand nombre de PC affectera directement la capacité mémoire, en effet, une certaine quantité de RAM sera affectée au système, la quantité totale affichée pourra alors varier de celle insérée sur votre carte mère

      Support