1/4

MZGLKAI

Legacy | Firmware updates supported

Rev. 1.0

Intel^® Celeron^® J4105

Mini-ITX form factor
Intel^® Celeron^® Processor J4105
Dual Channel DDR4, up to 2400Mhz, 2 x SO-DIMMs
HDMI 2.0a, D-Sub, eDP (in option), LVDS ports for multiple display
2 x GbE LAN ports
4 x RS232 COM ports
2 x RS232/422/485/5V/12V COM ports
5 x SATA III 6Gb/s with one SATA DOM supported
1 x M.2 NGFF-2280 SATA SSD socket
1 x M.2 E-key socket for CNVi interface module
High quality audio codec
1 x PCIe x4 (Gen2 x 2) expansion slot

儲存

產品規格

Board Size

Mini-ITX
170W x 170D (mm)

Operating Properties

Operating temperature: 0°C to 50°C
Operating humidity: 0-90% (non-condensing)
Non-operating temperature: -40°C to 70°C
Non-operating humidity: 0%-95% (non-condensing)

Processor Supported

Intel^® Celeron^® Processor J4105
14nm, 4 cores, 4 threads
1.5 - 2.5 GHz
4MB L2 cache
TDP 10W, fan-less design

Socket

1 x BGA 1090

Memory Type

2 x DDR4 1.2V SO-DIMM slots
Up to 2400Mhz
Max. memory capacity 8GB

Flash Memory

Integrated Network

2 x GbE LAN ports (Realtek® RTL8111HS)

Integrated Video Controller

Intel® HD Graphics 600
1 x HDMI port, supporting a maximum resolution of 3840x2160@60 Hz
1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
1 x eDP connector, supporting a maximum resolution of 3840x2160@60 Hz
1 x LVDS port, supporting a maximum resolution of 1920x1200@60 Hz
* eDP connector is alternative with LVDS port, only one can be worked at the same time

Integrated Audio Controller

Realtek® ALC269Q

Integrated SATA Controller

5 x SATA 6Gbps
- 4 x from Marvell 88SE9230
- 1 x from J4105 with SATA DOM supported

Support RAID Function

Marvell^® SATA RAID 0/1/10

Expansion Slot

1 x PCIe x4 (Gen2 x 2)

1 x M.2 slot:
- M-key
- SATA 6Gb/s
- Supports NGFF-2280 cards

1 x M.2 slot:
- E-key
- Supports NGFF-2230 CNVi cards only

On Board Connectors

1 x 4-pin ATX 12V power connector
1 x eDP connector (in option)
1 x LVDS connector
1x Backlight control connector
5 x SATA 6Gb/s connectors
3 x SATA power connectors
1 x CPU fan header
1 x System fan header
1 x Front panel header
1 x Front audio header
1 x Speaker out header
1 x USB 3.0 headers
1 x USB 2.0 headers
4 x COM headers (RS232)
1 x TPM header (TPM module kit is in option)
2 x LAN LED headers
1 x Case open header
1 x GPIO header
1 RAID LED header
1 x AT mode jumper
1 x Buzzer

Rear I/O Connectors

1 x DC in jack
3 x Audio jacks(Line in, Line out, Mic in)
2 x COM (RS232 /422 /485 and RI/5V/12V)
1 x HDMI 2.0a (HDCP 2.2)
1 x D-Sub
2 x RJ45
2 x USB 2.0
2 x USB 3.0 type A ( ( 1 x USB3.0 Type A + 1 x USB3.0 Type C in BOM option)

TPM

1 x TPM header

OS Driver Supported

Win 10 64bit

PSU Connectors

1 x 12 DC-in or
1 x 12V power connector (2 x 2 pin)

Packaging Bundle

Capacity: 20pcs
Carton size: 550x451x330 (mm)
Content:
1 x IO Shield
2 x SATA power cables (300mm)

Ordering Information

Motherboard: 9MZGLKAINR-SI
Optional kit:
TPM 1.2 module: 9CMUFLNR-00
TPM 2.0 module: 9CTM000NR-00

[#1] 本網站所提供之產品規格、圖片及其他資訊僅供參考，如有差異應以實際產品為準。技嘉科技保留隨時修改內容的權利，並不對因使用上述資料而導致的任何損失承擔責任。

[#2] 本產品所標示之效能數據為晶片廠商或相關介面標準制定組織所公佈的最大理論值，實際效能可能因系統配置及使用環境而有所不同。

[#3] 本文所使用的所有商標及企業識別標誌均為其合法所有者的財產。

Support

描述	版本	檔案大小	日期