FAQ
Back
Why can not activate Wake On Lan function when using Marvell 8053 or 8056 LAN Chip?
Related Model ( 34 )
- GA-K8NXP-9 (rev. 1.0)
- GA-K8NXP-SLI (rev. 1.0)
- GA-K8N Ultra-SLI (rev. 1.0)
- GA-K8N Ultra-9 (rev. 1.0)
- GA-K8VT890-9 (rev. 1.0)
- GA-8AENXP-DW (rev. 1.x)
- GA-K8N Pro-SLI (rev. 1.0)
- GA-8N-SLI Royal (rev. 1.0)
- GA-8I945PMF (rev. 1.x)
- GA-8I945GMF (rev. 1.x)
- GA-K8N-SLI (rev. 1.x)
- GA-8I945GMF-RH (rev. 1.x)
- GA-965P-DS4 (rev. 1.0)
- GA-965P-DQ6 (rev. 1.0)
- GA-965P-DS3 (rev. 1.0)
- GA-965P-S3 (rev. 1.0)
- GA-965G-DS3 (rev. 1.0)
- GA-K8VT890-9 (rev. 1.1)
- GA-965GM-S2 (rev. 1.0)
- GA-965G-DS4 (rev. 2.0)
- GA-965GM-DS2 (rev. 2.0)
- GA-965G-DS3 (rev. 2.0)
- GA-965P-DS3P (rev. 2.0)
- GA-965P-DQ6 (rev. 2.0)
- GA-965P-DS4 (rev. 2.0)
- GA-965P-DS3 (rev. 2.0)
- GA-965P-DQ6 (rev. 3.3)
- GA-965P-DS4 (rev. 3.3)
- GA-965P-DS3P (rev. 3.3)
- GA-965P-DS3 (rev. 3.3)
- GA-965P-S3 (rev. 3.3)
- GA-965GM-S2 (rev. 2.0)
- GA-965G-DS3 (rev. 3.3)
- GA-965G-DS4 (rev. 3.3)
For activating Wake On Lan function with Marvell 8053 or 8056. It should be set with two more options:
- Enter Device Manager → Find Network Adapter Marvell Yukon → Properties → Power Management → Check "Allow this device to bring the computer out of standby."
- Enter Device Manager → Find Network Adapter Marvell Yukon → Properties → Advanced → "Wake From Shutdown", set Value to "On".
Customer Service