1/2
H261-T60
End of Support2U 4-Node High Density ARM Server System - 12 x 3.5" HDD
- Supports blockchain infrastructure
- 2U 4-Node rear access high density ARM server system
- 8 x Marvell® ThunderX2® CN9975 28-core ARM processors
- 8-Channel RDIMM DDR4 per processor per CPU, total 64 x DIMMs
- 8 x 25 or 10Gb/s SFP+ LAN ports (QLogic® QL41202)
- 1 x CMC global management port
- 12 x 3.5" SAS/SATA hot-swappable HDD/SSD bays
- 8 x low profile PCIe Gen3 expansion slots
- 4 x OCP 2.0 Gen3 x16 mezzanine slots
- Aspeed® AST2500 remote management controller
- Dual 2200W 80 PLUS Platinum redundant/hot-swap power supply
Specifications
Dimensions (WxHxD, mm)
2U 4-Node - Rear access
440 x 87 x 820
440 x 87 x 820
Motherboard
MT61-HD1
CPU
Per Node:
2 x Marvell® ThunderX2® CN9975 ARM processors
64bit ARMv8 architecture
28 cores per processor, 2.0GHz, TDP 150W
16nm technology
Total:
8 x Marvell® ThunderX2® CN9975 ARM processors
2 x Marvell® ThunderX2® CN9975 ARM processors
64bit ARMv8 architecture
28 cores per processor, 2.0GHz, TDP 150W
16nm technology
Total:
8 x Marvell® ThunderX2® CN9975 ARM processors
Chipset
-
Memory
Per Node:
16 x DIMM slots
DDR4 memory supported only
8-channel memory architecture per processor
RDIMM modules up to 64GB supported
1.2V modules: 2666/2400/2133 MHz
Total:
64 x DIMM slots
- NOTE: GIGABYTE recommends to follow the QVL when selecting memory modules to avoid any system compatibility issues
- NOTE: DDR4 2666 Mhz with 1DPC, DDR4 2400 with 2DPC
16 x DIMM slots
DDR4 memory supported only
8-channel memory architecture per processor
RDIMM modules up to 64GB supported
1.2V modules: 2666/2400/2133 MHz
Total:
64 x DIMM slots
- NOTE: GIGABYTE recommends to follow the QVL when selecting memory modules to avoid any system compatibility issues
- NOTE: DDR4 2666 Mhz with 1DPC, DDR4 2400 with 2DPC
LAN
Per Node:
2 x 25Gb/s or 10Gb/s SFP28 LAN ports (QLogic® QL41202)
1 x 10/100/1000 management LAN port
Total:
8 x 25Gb/s or 10Gb/s SFP28 LAN ports (QLogic® QL41202)
4 x 10/100/1000 management LAN ports
1 x 10/100/1000 *CMC global management port
*CMC: Chassis Management Controller, to monitor all status of computing node
2 x 25Gb/s or 10Gb/s SFP28 LAN ports (QLogic® QL41202)
1 x 10/100/1000 management LAN port
Total:
8 x 25Gb/s or 10Gb/s SFP28 LAN ports (QLogic® QL41202)
4 x 10/100/1000 management LAN ports
1 x 10/100/1000 *CMC global management port
*CMC: Chassis Management Controller, to monitor all status of computing node
Video
Integrated in Aspeed® AST2500
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM
Audio
-
Storage
Per node:
3 x 3.5" SATA/SAS hot-swappable HDD/SSD bays
Total:
12 x 3.5" SATA/SAS hot-swappable HDD/SSD bays
2.5" HDD/SSD supported
SAS card is required for SAS devices support
- NOTE: GIGABYTE recommends to follow the QVL when selecting hard drives to avoid any system compatibility issues
3 x 3.5" SATA/SAS hot-swappable HDD/SSD bays
Total:
12 x 3.5" SATA/SAS hot-swappable HDD/SSD bays
2.5" HDD/SSD supported
SAS card is required for SAS devices support
- NOTE: GIGABYTE recommends to follow the QVL when selecting hard drives to avoid any system compatibility issues
SAS
-
RAID
Depends on SAS Card
Peripheral Drives
-
Expansion Slots
Per node:
1 x Half-length low-profile slot with PCIe x16 (Gen3 x16 bus)
1 x Half-length low-profile slot with PCIe x8 (Gen3 x8 bus)
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bus
Total:
4 x Half-length low-profile slots with PCIe x16 (Gen3 x16 bus)
4 x Half-length low-profile slots with PCIe x8 (Gen3 x8 bus)
4 x OCP 2.0 mezzanine slots with PCIe Gen3 x16 bus
1 x Half-length low-profile slot with PCIe x16 (Gen3 x16 bus)
1 x Half-length low-profile slot with PCIe x8 (Gen3 x8 bus)
1 x OCP 2.0 mezzanine slot with PCIe Gen3 x16 bus
Total:
4 x Half-length low-profile slots with PCIe x16 (Gen3 x16 bus)
4 x Half-length low-profile slots with PCIe x8 (Gen3 x8 bus)
4 x OCP 2.0 mezzanine slots with PCIe Gen3 x16 bus
Internal I/O
1 x Front panel header
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS switch
1 x BIOS recovery switch
1 x HDD back plane board header
1 x PMBus connector
1 x IPMB connector
1 x Clear CMOS switch
1 x BIOS recovery switch
Front I/O
Per node:
1 x Power button with LED
1 x ID button with LED
1 x Status LED
Total:
4 x Power button with LED
4 x ID button with LED
4 x Status LED
*1 x CMC status LED
*Only one CMC status LED per system
1 x Power button with LED
1 x ID button with LED
1 x Status LED
Total:
4 x Power button with LED
4 x ID button with LED
4 x Status LED
*1 x CMC status LED
*Only one CMC status LED per system
Rear I/O
Per node:
2 x USB 3.0
1 x COM (RS232 type)
2 x SFP28
1 x MLAN
1 x ID button with LED
Total:
8 x USB 3.0
4 x COMs (RS232 type)
8 x SFP28
4 x MLAN
4 x ID button with LEDs
*1 x CMC global management port
*Only one CMC global management port per system
2 x USB 3.0
1 x COM (RS232 type)
2 x SFP28
1 x MLAN
1 x ID button with LED
Total:
8 x USB 3.0
4 x COMs (RS232 type)
8 x SFP28
4 x MLAN
4 x ID button with LEDs
*1 x CMC global management port
*Only one CMC global management port per system
Backplane Board
12 x SATA/SAS ports
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
Bandwidth: SATAIII 6Gb/s or SAS 12Gb/s per port
TPM
-
Power Supply[#1]
2 x 2200W redundant PSUs
80 PLUS Platinum
AC Input:
- 100-127V~/ 14A, 47-63Hz
- 200-240V~/ 12.6A, 47-63Hz
DC Output:
- Max 1200W/ 100-127V~
+12.12V/ 95.6A
+12Vsb/ 3.5A
- Max 2200W/ 200-240V
+12.12V/ 178.1A +12Vsb/ 3.5A
NOTE: The system power supply requires C19 type power cord
+12.12V/ 178.1A +12Vsb/ 3.5A
NOTE: The system power supply requires C19 type power cord
System Management
Aspeed® AST2500 management controller
Avocent® MergePoint IPMI 2.0 web interface:
Avocent® MergePoint IPMI 2.0 web interface:
- Network settings
- Network security settings
- Hardware information
- Users control
- Services settings
- IPMI settings
- Sessions control
- LDAP settings
- Power control
- Fan profiles
- Voltages, fans and temperatures monitoring
- System event log
- Events management (platform events, trap settings, email settings)
- Serial Over LAN
- vKVM & vMedia (HTML5)
OS Compatibility
Compatible OS
RHEL 7.5 64bit (ARM64)**
Ubuntu 18.04 (ARM64)
SUSE SLES 15 (ARM64)
CentOS 7.6 64bit (ARM64)
Oracle Linux 7.4 (ARM64)
** GIGABYTE recommends to contact with us or our partners for further details
RHEL 7.5 64bit (ARM64)**
Ubuntu 18.04 (ARM64)
SUSE SLES 15 (ARM64)
CentOS 7.6 64bit (ARM64)
Oracle Linux 7.4 (ARM64)
** GIGABYTE recommends to contact with us or our partners for further details
System Fans
4 x 80x80x38mm (16,300rpm)
Operating Properties
TBD: 環溫需要確認
Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing)
Operating temperature: 10°C to 35°C Operating humidity: 8%-80% (non-condensing) Non-operating temperature: -40°C to 60°C Non-operating humidity: 20%-95% (non-condensing)
Weight
Net Weight: TBD
Gross Weight: TBD
Gross Weight: TBD
Packaging Dimensions
1167 x 700 x 309 (mm)
Packaging Content
1 x H261-T60 system
8 x CPU heatsinks
1 x Rail kit
8 x CPU heatsinks
1 x Rail kit
Part Numbers
Barebone package: 6NH261T60MR-00
Part Numbers:
- Motherboard: 9MT61HD1NR-00
- Rail kit: 25HB2-AN6103-K0R - CPU heatsink: 25ST1-25320E-J1R and 25ST1-25320F-J1R - Back plane board: 9CBPH0C1NR-00 - Front panel board: 9CFPH000NR-00
- Power supply: 25EP0-222001-D0S - Riser card - CRSH010: 9CRSH010NR-00 - Riser card - CRSH011: 9CRSH011NR-00
- Rail kit: 25HB2-AN6103-K0R - CPU heatsink: 25ST1-25320E-J1R and 25ST1-25320F-J1R - Back plane board: 9CBPH0C1NR-00 - Front panel board: 9CFPH000NR-00
- Power supply: 25EP0-222001-D0S - Riser card - CRSH010: 9CRSH010NR-00 - Riser card - CRSH011: 9CRSH011NR-00
[#1] Power cords are not included with server packages. Customers are responsible for selecting appropriate power cords from the optional accessories or contacting sales for customization.
[#2] All materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at any time without prior notice.
[#3] Advertised performance is based on maximum theoretical values as specified by the respective chipset vendors or standards organizations. Actual performance may vary depending on system configuration.
[#4] All trademarks and logos are the property of their respective owners.
Support
Related Resources
