page.modelPage.tab.spec

  • Processor
    1. CPU - Pentium® II processor
    2. 242 pins 66MHz slot1 on board.
    3. Cache memory
      1. 32 KB 1st cache memory included in CPU.
      2. 256KB/512 KB 2nd cache in CPU.
      3. Support DIB speed mode for L2 Cache.
      4. 1 66MHz / 133MHz AGP bus.
  • Front Side Bus
    1. 66MHz
  • Styrkrets
    1. Intel 440LX chipset
  • Minne
    1. 4 banks 168 pins DIMM module sockets on board.
    2. Use 8 / 16 / 32 / 64 / 128 / 256 MB 60~70 ns DIMM module DRAM.
    3. 8 ~ 1 GB DRAM size.
    4. Support 3.3V SDRAM / EDO type DRAM.
    5. Support ECC or Non-ECC type DRAM
  • Expansionsplatser
    1. 1* 66 MHz AGP BUS
    2. 4* 33MHz Master / Slave PCI-BUS.
    3. 3* 8MHz 16 bits ISA BUS.
  • Interna I/O kontakter
    1. 2 Ultra DMA/33 Bus Master IDE channels on board.(Using IRQ14,15)
    2. Backward Support Mode 3,4 IDE & ATAPI CD -ROM
  • Kontakter på baksidan
    1. Supports 2 16550 COM ports. (Using IRQ4, 3)
    2. Supports 1 EPP/ECP LPT port. (Using IRQ7 or 5 and DMA3 or 1)
    3. Supports 1 1.44/2.88 MB Floppy port. (Using DMA2 & IRQ6)
    4. Supports 2 USB ports.
    5. Supports PS/2 Mouse. (Using IRQ12 )
    6. Supports PS/2 Keyboard. (Using IRQ1 )
  • Hårdvaru visning
    1. H/W monitor power status (5V, 12V, CPU voltage & CMOS battery voltage)
  • BIOS
    1. Licensed AWARD BIOS.
    2. 256KB FLASH EEPROM.
    3. Supports Plug & Play, DMI, ACPI Function
    4. AT CMOS Setup, BIOS / Chipset Setup, Green Setup, Hard Disk Utility included.
    5. Monitor Health status
  • Formfaktor
    1. ATX Form Factor, 4 layers PCB
  • Drivrutiner
    1. Intel LDCM® optional.
    2. Health monitor Utility.
    3. Bus Master IDE Driver
  • Övriga funktioner
    1. Protection
      1. Onboard Buzzer Alarm when detect "CPU FAN Failure" or "CPU Overheat"
      2. Automatically slow down CPU speed when "CPU FAN Failure" or "CPU Overheat".
      3. Intel LDCM® support.

    2. GREEN FUNCTION
      1. Suspend mode support.
      2. Green switch & LED support.
      3. IDE & Display power down support.
      4. Monitor all IRQ / DMA / Display / I/O events.
  • Processor
    1. CPU - Pentium® II processor
    2. 242 pins 66MHz slot1 on board.
    3. Cache memory
      1. 32 KB 1st cache memory included in CPU.
      2. 256KB/512 KB 2nd cache in CPU.
      3. Support DIB speed mode for L2 Cache.
      4. 1 66MHz / 133MHz AGP bus.
  • Front Side Bus
    1. 66MHz
  • Styrkrets
    1. Intel 440LX chipset
  • Minne
    1. 4 banks 168 pins DIMM module sockets on board.
    2. Use 8 / 16 / 32 / 64 / 128 / 256 MB 60~70 ns DIMM module DRAM.
    3. 8 ~ 1 GB DRAM size.
    4. Support 3.3V SDRAM / EDO type DRAM.
    5. Support ECC or Non-ECC type DRAM
  • Expansionsplatser
    1. 1* 66 MHz AGP BUS
    2. 4* 33MHz Master / Slave PCI-BUS.
    3. 3* 8MHz 16 bits ISA BUS.
  • Interna I/O kontakter
    1. 2 Ultra DMA/33 Bus Master IDE channels on board.(Using IRQ14,15)
    2. Backward Support Mode 3,4 IDE & ATAPI CD -ROM
  • Kontakter på baksidan
    1. Supports 2 16550 COM ports. (Using IRQ4, 3)
    2. Supports 1 EPP/ECP LPT port. (Using IRQ7 or 5 and DMA3 or 1)
    3. Supports 1 1.44/2.88 MB Floppy port. (Using DMA2 & IRQ6)
    4. Supports 2 USB ports.
    5. Supports PS/2 Mouse. (Using IRQ12 )
    6. Supports PS/2 Keyboard. (Using IRQ1 )
  • Hårdvaru visning
    1. H/W monitor power status (5V, 12V, CPU voltage & CMOS battery voltage)
  • BIOS
    1. Licensed AWARD BIOS.
    2. 256KB FLASH EEPROM.
    3. Supports Plug & Play, DMI, ACPI Function
    4. AT CMOS Setup, BIOS / Chipset Setup, Green Setup, Hard Disk Utility included.
    5. Monitor Health status
  • Formfaktor
    1. ATX Form Factor, 4 layers PCB
  • Drivrutiner
    1. Intel LDCM® optional.
    2. Health monitor Utility.
    3. Bus Master IDE Driver
  • Övriga funktioner
    1. Protection
      1. Onboard Buzzer Alarm when detect "CPU FAN Failure" or "CPU Overheat"
      2. Automatically slow down CPU speed when "CPU FAN Failure" or "CPU Overheat".
      3. Intel LDCM® support.

    2. GREEN FUNCTION
      1. Suspend mode support.
      2. Green switch & LED support.
      3. IDE & Display power down support.
      4. Monitor all IRQ / DMA / Display / I/O events.
old.customermodelpage.monitorModelHdmiInfo
old.modelpage.specmemo

page.modelPage.tab.support