CMT7011
(rev. 1.0)

Discontinued

M.2 Card
  • 4 x M.2 slot
  • Mezzanine card (Gen3 x4 bus)
  • 122.5 x 43 mm

SPECIFICATIONS

Ports
1 x M.2 slot:
  • Socket 3
  • M key
  • Max. width: 22mm
  • Max. length: 80mm
  • Type 2280
    Controller
    -
    Interface
    Gen3 x4 bus
    Dimension
    122.5 x 43 mm
    Format
    Mezzanine L type card
    Includes
    1 x riser card
    2 x Stand-off 27mm
    2 x M3x5L screws
    1 x M2x2.5 screw
    Remark
      California Proposition 65:
      WARNING: This product contains a chemical, including lead,
      know to the state of California to cause birth defects or other reproductive harm.
      http://www.p65warnings.ca.gov/
    Ordering Information
    9CMT7011NR-00
    * The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
    * Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
    * All trademarks and logos are the properties of their respective holders.
    * Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
    {{ selectedProductCount }}
    Compare
    • {{ selectedProducts[index].modelName }}
    Clear All
    Back
    You may only add up to 4 items for comparison at one time.