- Home
- Enterprise
- Accessory
- CMT7011
CMT7011
(rev. 1.0)
Discontinued
M.2 Card
- 4 x M.2 slot
- Mezzanine card (Gen3 x4 bus)
- 122.5 x 43 mm
SPECIFICATIONS
Ports
1 x M.2 slot:
- Socket 3
- M key
- Max. width: 22mm
- Max. length: 80mm
- Type 2280
Controller
-
Interface
Gen3 x4 bus
Dimension
122.5 x 43 mm
Format
Mezzanine L type card
Includes
1 x riser card
2 x Stand-off 27mm
2 x M3x5L screws
1 x M2x2.5 screw
2 x Stand-off 27mm
2 x M3x5L screws
1 x M2x2.5 screw
Remark
California Proposition 65:
WARNING: This product contains a chemical, including lead,
know to the state of California to cause birth defects or other reproductive harm.
http://www.p65warnings.ca.gov/
Ordering Information
9CMT7011NR-00
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.