Spezifikation

  • Prozessor
    1. Socket 478 for Intel® FC-PGA2 Pentium® 4 processor in 478 pin package
    2. 400 MHz FSB
  • Front Side Bus
    1. 400MHz
  • Chipsatz
    1. Intel® 845 Chipset consists of Intel® Memory Controller Hub (MCH) and the Intel® I/O Controller Hub 2 (ICH2)
    2. TE 8702 I/O chip
    3. AC97 codec
  • Arbeitsspeicher
    1. 3 x 168-pin DIMM slot
    2. Supports up to 3GB PC100/133 SDR-SDRAM
  • Erweiterungssteckplätze
    1. 1 x AGP 4X slot supports 4X mode & AGP 2.0 compliant
    2. 5 x PCI slots support 33MHz & PCI 2.2 compliant
  • I/O
    1. IDE1 and IDE 2 supports PIO mode 3, 4, UDMA ATA 100/66 IDE devices
    2. 1 x FDD, 2 x COM, 1 x LPT, PS/2 Keyboard, PS/2 Mouse on board
    3. 1 x Joystick, 1 x Line-in, 1 x Line-out and 1 x MIC on board
    4. 2 x USB ports on board
    5. 2 x USB ports by cable
    6. IrDA TX / RX header
  • BIOS
    1. Award BIOS with enhanced ACPI feature for PC98/Win98/Me/Win2000 compliance, Green, PnP, DMI, INT13 (>8.4GB) & Anti-Virus functions
    2. IDE#1~#4, SCSI, LS120, ZIP & CD-ROM bootable
  • Form Factor
    1. ATX form factor, 4 layers PCB (29.5 x 19.6 cm)
  • Treiber
    1. Gigabyte Windows Utility Manager
    2. Intel® LDCM® utility
    3. Sigmatel sound driver (Version 1.0)
    4. REALTEK Sound Driver (version 1.1)
  • Andere Funktionen
    1. Q-Flash™, @-BIOS™
    2. Includes 3 fan power connectors
    3. Poly fuse for keyboard over-current protection
  • Stromversorgung
    1. ATX power connector and ATX 12V connector
    2. Power-on by LAN, RTC, Modem & switch
    3. Power-off by Windows 95/98/Me/2000/NT/XP shut down & switch
    4. Supports USB device wake up
  • Prozessor
    1. Socket 478 for Intel® FC-PGA2 Pentium® 4 processor in 478 pin package
    2. 400 MHz FSB
  • Front Side Bus
    1. 400MHz
  • Chipsatz
    1. Intel® 845 Chipset consists of Intel® Memory Controller Hub (MCH) and the Intel® I/O Controller Hub 2 (ICH2)
    2. TE 8702 I/O chip
    3. AC97 codec
  • Arbeitsspeicher
    1. 3 x 168-pin DIMM slot
    2. Supports up to 3GB PC100/133 SDR-SDRAM
  • Erweiterungssteckplätze
    1. 1 x AGP 4X slot supports 4X mode & AGP 2.0 compliant
    2. 5 x PCI slots support 33MHz & PCI 2.2 compliant
  • I/O
    1. IDE1 and IDE 2 supports PIO mode 3, 4, UDMA ATA 100/66 IDE devices
    2. 1 x FDD, 2 x COM, 1 x LPT, PS/2 Keyboard, PS/2 Mouse on board
    3. 1 x Joystick, 1 x Line-in, 1 x Line-out and 1 x MIC on board
    4. 2 x USB ports on board
    5. 2 x USB ports by cable
    6. IrDA TX / RX header
  • BIOS
    1. Award BIOS with enhanced ACPI feature for PC98/Win98/Me/Win2000 compliance, Green, PnP, DMI, INT13 (>8.4GB) & Anti-Virus functions
    2. IDE#1~#4, SCSI, LS120, ZIP & CD-ROM bootable
  • Form Factor
    1. ATX form factor, 4 layers PCB (29.5 x 19.6 cm)
  • Treiber
    1. Gigabyte Windows Utility Manager
    2. Intel® LDCM® utility
    3. Sigmatel sound driver (Version 1.0)
    4. REALTEK Sound Driver (version 1.1)
  • Andere Funktionen
    1. Q-Flash™, @-BIOS™
    2. Includes 3 fan power connectors
    3. Poly fuse for keyboard over-current protection
  • Stromversorgung
    1. ATX power connector and ATX 12V connector
    2. Power-on by LAN, RTC, Modem & switch
    3. Power-off by Windows 95/98/Me/2000/NT/XP shut down & switch
    4. Supports USB device wake up

* Die Begriffe HDMI, HDMI High-Definition Multimedia Interface, HDMI-Aufmachung (HDMI Trade Dress) und die HDMI-Logos sind Marken oder eingetragene Marken von HDMI Licensing Administrator, Inc.
* Das vorliegende Material dient nur zur Referenz. GIGABYTE behält sich das Recht vor, ohne Vorwarnung Inhalte zu verändern oder zu entfernen.
* Die beworbene Leistung basiert auf den maximal theoretischen Werten der Chipsatzhersteller oder von Organisationen, die die Interface-Spezifikationen erstellt haben. Die aktuelle Performance kann je nach Systemkonfiguration variieren.
* Alle Trademarks und Logos sind Eigentum der Markeninhaber.
* Aufgrund der Standard-PC-Architektur ist ein Teil des Speichers für die Nutzung des Systems reserviert und daher kann die aktuelle Speichergröße von der Speicherangabe abweichen.

Unterstützung