Particuliers Entreprises
  1. Accueil
  2. Particuliers
  3. Carte Mère
  4. GA-990FX-Gaming

GA-990FX-Gaming (Rev. 1.0)

Rev. 1.0Rev. 1.1
AMD 990FX + SB950 Chipset
GénéralitésSpécificationsSupportActualité / RécompensesWhere to Buy

Spécifications

  • Processeur
  • AM3+ Socket:
    1. AMD AM3+ FX processor
    2. AMD AM3 Phenom™ II processor/ AMD Athlon™ II processor
    (Please refer "CPU Support List" for more information.)
  • Hyper Transport
    1. 5200 MT/s
  • Chipset
    1. North Bridge: AMD 990FX
    2. South Bridge: AMD SB950
  • Mémoire
    1. 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
      * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
    2. Dual channel memory architecture
    3. Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules
      * To support a DDR3 1866 MHz (and above) memory, you must install an AM3+ CPU first.
    4. Support for Extreme Memory Profile (XMP) memory modules
    (Please refer "Memory Support List" for more information.)
  • Audio
    1. Realtek® ALC1150 codec
    2. TI Burr Brown® OPA2134 operational amplifier
    3. High Definition Audio
    4. 2/4/5.1/7.1-channel
    5. Support for S/PDIF Out
  • Réseau
    1. Rivet Networks Killer™ E2201 LAN chip (10/100/1000 Mbit)
  • Port d'expansion
    1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1/PCIEX16_2)
      * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.
    2. 1 x PCI Express x16 slot, running at x4 (PCIEX4)
      * The PCIEX4 slot shares bandwidth with the PCIEX1_3 slot. When PCIEX1_3 is populated with a PCI Express expansion card, the PCIEX4 slot will operate at up to x2 mode.
    3. 3 x PCI Express x1 slots
      (All of the PCI Express slots conform to PCI Express 2.0 standard.)
  • Technologie Multi-cartes graphiques
    1. Support for NVIDIA® Quad-GPU SLI™ and 2-Way NVIDIA® SLI™ Technologies
    2. Support for AMD Quad-GPU CrossFireX™ and 2-Way AMD CrossFire™ Technologies
  • Interface de Stockage
  • South Bridge:
    1. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/x2/x1 SSD support)
    2. 6 x SATA 6Gb/s connectors
    3. Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD
      * Refer to "1-9 Internal Connectors," for the supported configurations with the M.2 and SATA connectors.
  • USB
  • South Bridge:
    1. 12 x USB 2.0/1.1 ports (6 ports on the back panel, 6 ports available through the internal USB headers)
    VIA® VL805 chip:
    1. 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
    ASMedia® USB 3.1 Controller:
    1. 1 x USB Type-C™ port on the back panel, with USB 3.1 support
    2. 1 x USB 3.1 Type-A port (red) on the back panel
  • Connecteurs d'entrées/sorties internes
    1. 1 x 24-pin ATX main power connector
    2. 1 x 8-pin ATX 12V power connector
    3. 1 x M.2 Socket 3 connector
    4. 6 x SATA 6Gb/s connectors
    5. 1 x CPU fan header
    6. 2 x system fan headers
    7. 1 x power fan header
    8. 1 x front panel header
    9. 1 x front panel audio header
    10. 1 x S/PDIF Out header
    11. 1 x USB 3.0/2.0 header
    12. 3 x USB 2.0/1.1 headers
    13. 1 x Trusted Platform Module (TPM) header
    14. 1 x serial port header
    15. 1 x Clear CMOS jumper
    16. 1 x audio gain control switch
    17. 1 x power button
    18. 1 x reset button
    19. 1 x Clear CMOS button
  • Connecteur du Panneau Arrière
    1. 1 x PS/2 keyboard/mouse port
    2. 1 x USB Type-C™ port, with USB 3.1 support
    3. 1 x USB 3.1 Type-A port (red)
    4. 2 x USB 3.0/2.0 ports
    5. 6 x USB 2.0/1.1 ports
    6. 1 x RJ-45 port
    7. 1 x optical S/PDIF Out connector
    8. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
  • Contrôleur d'Entrée/Sortie
    1. iTE® I/O Controller Chip
  • Monitorage Matériel
    1. System voltage detection
    2. CPU/System temperature detection
    3. CPU/System/Power fan speed detection
    4. CPU overheating warning
    5. CPU/System/Power fan fail warning
    6. CPU/System fan speed control
      * Whether the fan speed control function is supported will depend on the cooler you install.
  • BIOS
    1. 2 x 32 Mbit flash
    2. Use of licensed AMI UEFI BIOS
    3. Support for DualBIOS™
    4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
  • Fonctionnalités Exclusives
    1. Support for APP Center
      * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
      @BIOS
      Ambient LED
      Cloud Station
      EasyTune
      Game Controller
      Smart TimeLock
      Smart Recovery 2
      System Information Viewer
      USB Blocker
    2. Support for Q-Flash
    3. Support for ON/OFF Charge
    4. Support for Smart Switch
    5. Support for Xpress Install
  • Logiciels Fournis
    1. Norton® Internet Security (OEM version)
  • Système d'Exploitation
    1. Support for Windows 10/8.1/7
  • Dimensions
    1. ATX Form Factor; 30.5cm x 24.4cm
  • Remarque
    1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
    2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.
    • Processeur
    • AM3+ Socket:
      1. AMD AM3+ FX processor
      2. AMD AM3 Phenom™ II processor/ AMD Athlon™ II processor
      (Please refer "CPU Support List" for more information.)
    • Hyper Transport
      1. 5200 MT/s
    • Chipset
      1. North Bridge: AMD 990FX
      2. South Bridge: AMD SB950
    • Mémoire
      1. 4 x DDR3 DIMM sockets supporting up to 32 GB of system memory
        * Due to a Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
      2. Dual channel memory architecture
      3. Support for DDR3 2000(O.C.)/1866/1600/1333/1066 MHz memory modules
        * To support a DDR3 1866 MHz (and above) memory, you must install an AM3+ CPU first.
      4. Support for Extreme Memory Profile (XMP) memory modules
      (Please refer "Memory Support List" for more information.)
    • Audio
      1. Realtek® ALC1150 codec
      2. TI Burr Brown® OPA2134 operational amplifier
      3. High Definition Audio
      4. 2/4/5.1/7.1-channel
      5. Support for S/PDIF Out
    • Réseau
      1. Rivet Networks Killer™ E2201 LAN chip (10/100/1000 Mbit)
    • Port d'expansion
      1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1/PCIEX16_2)
        * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.
      2. 1 x PCI Express x16 slot, running at x4 (PCIEX4)
        * The PCIEX4 slot shares bandwidth with the PCIEX1_3 slot. When PCIEX1_3 is populated with a PCI Express expansion card, the PCIEX4 slot will operate at up to x2 mode.
      3. 3 x PCI Express x1 slots
        (All of the PCI Express slots conform to PCI Express 2.0 standard.)
    • Technologie Multi-cartes graphiques
      1. Support for NVIDIA® Quad-GPU SLI™ and 2-Way NVIDIA® SLI™ Technologies
      2. Support for AMD Quad-GPU CrossFireX™ and 2-Way AMD CrossFire™ Technologies
    • Interface de Stockage
    • South Bridge:
      1. 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/x2/x1 SSD support)
      2. 6 x SATA 6Gb/s connectors
      3. Support for RAID 0, RAID 1, RAID 5, RAID 10, and JBOD
        * Refer to "1-9 Internal Connectors," for the supported configurations with the M.2 and SATA connectors.
    • USB
    • South Bridge:
      1. 12 x USB 2.0/1.1 ports (6 ports on the back panel, 6 ports available through the internal USB headers)
      VIA® VL805 chip:
      1. 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
      ASMedia® USB 3.1 Controller:
      1. 1 x USB Type-C™ port on the back panel, with USB 3.1 support
      2. 1 x USB 3.1 Type-A port (red) on the back panel
    • Connecteurs d'entrées/sorties internes
      1. 1 x 24-pin ATX main power connector
      2. 1 x 8-pin ATX 12V power connector
      3. 1 x M.2 Socket 3 connector
      4. 6 x SATA 6Gb/s connectors
      5. 1 x CPU fan header
      6. 2 x system fan headers
      7. 1 x power fan header
      8. 1 x front panel header
      9. 1 x front panel audio header
      10. 1 x S/PDIF Out header
      11. 1 x USB 3.0/2.0 header
      12. 3 x USB 2.0/1.1 headers
      13. 1 x Trusted Platform Module (TPM) header
      14. 1 x serial port header
      15. 1 x Clear CMOS jumper
      16. 1 x audio gain control switch
      17. 1 x power button
      18. 1 x reset button
      19. 1 x Clear CMOS button
    • Connecteur du Panneau Arrière
      1. 1 x PS/2 keyboard/mouse port
      2. 1 x USB Type-C™ port, with USB 3.1 support
      3. 1 x USB 3.1 Type-A port (red)
      4. 2 x USB 3.0/2.0 ports
      5. 6 x USB 2.0/1.1 ports
      6. 1 x RJ-45 port
      7. 1 x optical S/PDIF Out connector
      8. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)
    • Contrôleur d'Entrée/Sortie
      1. iTE® I/O Controller Chip
    • Monitorage Matériel
      1. System voltage detection
      2. CPU/System temperature detection
      3. CPU/System/Power fan speed detection
      4. CPU overheating warning
      5. CPU/System/Power fan fail warning
      6. CPU/System fan speed control
        * Whether the fan speed control function is supported will depend on the cooler you install.
    • BIOS
      1. 2 x 32 Mbit flash
      2. Use of licensed AMI UEFI BIOS
      3. Support for DualBIOS™
      4. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
    • Fonctionnalités Exclusives
      1. Support for APP Center
        * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
        @BIOS
        Ambient LED
        Cloud Station
        EasyTune
        Game Controller
        Smart TimeLock
        Smart Recovery 2
        System Information Viewer
        USB Blocker
      2. Support for Q-Flash
      3. Support for ON/OFF Charge
      4. Support for Smart Switch
      5. Support for Xpress Install
    • Logiciels Fournis
      1. Norton® Internet Security (OEM version)
    • Système d'Exploitation
      1. Support for Windows 10/8.1/7
    • Dimensions
      1. ATX Form Factor; 30.5cm x 24.4cm
    • Remarque
      1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
      2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP. If drivers are available from the vendors, we will update them on the GIGABYTE website.

      * Les termes HDMI, interface multimédia haute définition HDMI et habillage commercial HDMI, et les logos HDMI sont des marques commerciales et des marques déposées de HDMI Licensing Administrator, Inc.
      * Les informations ici proposées le sont pour référence uniquement. GIGABYTE se réserve le droit de modifier ce contenu à tout moment et sans préavis.
      *Les performances affichées sont basées sur les informations proposées par les constructeurs de chipsets ou sociétés définissant les caractéristiques des interfaces. Performances pouvant varier selon configuration.
      * Marques et logos appartiennent aux détenteurs respectifs de leurs droits.
      * L'architecture de grand nombre de PC affectera directement la capacité mémoire, en effet, une certaine quantité de RAM sera affectée au système, la quantité totale affichée pourra alors varier de celle insérée sur votre carte mère

      Support