GIGABYTE M30 SSD 512GB
GP-GM30512G-G
Specifiche
- Interface
- PCIe 3.0x4, NVMe 1.3
- Form Factor
- M.2 2280
- Total Capacity
- 512GB
- NAND
- 3D TLC NAND Flash
- External DDR Cache
- DDR3L 2Gb
- Sequential Read speed
- Up to 3500 MB/s
- Sequential Write speed
- Up to 2600 MB/s
- Random Read IOPS
- up to 350K
- Random Write IOPS
- up to 302K
- Dimension
- 22 x 2.3 x 80 mm
- Mean time between failure (MTBF)
- 2 million hours
- Power Consumption (Active)
- Average: R: 5.9W, W:5W
- Power Consumption (Idle)
- L0/L0s/L1: 900mw
L1.2 < 3mw
- Temperature (Operating)
- 0°C to 70°C
- Temperature (Storage)
- -40°C to 85°C
- Warranty
- 1. Limited 5-years or 350TBW.
- 2. Limited warranty based on 5 years or 350TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
*TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail. - 3. When the usage of an NVME SSD as indicated by the "Percentage Used" (SMART ID: 05) in SMART page of "GIGABYTE SSD toolbox" reaches 100 means out of warranty. (A new unused product will show the number of 0)
- Note
- • Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
- • Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
- • Speeds based on internal testing. Actual performance may vary.
- • 1GB = 1 billion bytes. Actual useable capacity may vary.
- Interface
- PCIe 3.0x4, NVMe 1.3
- Form Factor
- M.2 2280
- Total Capacity
- 512GB
- NAND
- 3D TLC NAND Flash
- External DDR Cache
- DDR3L 2Gb
- Sequential Read speed
- Up to 3500 MB/s
- Sequential Write speed
- Up to 2600 MB/s
- Random Read IOPS
- up to 350K
- Random Write IOPS
- up to 302K
- Dimension
- 22 x 2.3 x 80 mm
- Mean time between failure (MTBF)
- 2 million hours
- Power Consumption (Active)
- Average: R: 5.9W, W:5W
- Power Consumption (Idle)
- L0/L0s/L1: 900mw
L1.2 < 3mw
- Temperature (Operating)
- 0°C to 70°C
- Temperature (Storage)
- -40°C to 85°C
- Warranty
- 1. Limited 5-years or 350TBW.
- 2. Limited warranty based on 5 years or 350TBW, whichever comes first. (*TBW is evaluated by JEDEC workload standard. )
*TBW (Terabyte Written): Terabytes Written is the total amount of data that can be written into a SSD before it is likely to fail. - 3. When the usage of an NVME SSD as indicated by the "Percentage Used" (SMART ID: 05) in SMART page of "GIGABYTE SSD toolbox" reaches 100 means out of warranty. (A new unused product will show the number of 0)
- Note
- • Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
- • Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
- • Speeds based on internal testing. Actual performance may vary.
- • 1GB = 1 billion bytes. Actual useable capacity may vary.
* I materiali qui forniti sono solo di riferimento. GIGABYTE si riserva il diritto di modificare o rivedere il contenuto in qualsiasi momento senza preavviso.
* Le prestazioni pubblicate si basano su valori massimi teorici fornite dai rispettivi fornitori di chipset o organizzazione che hanno definito le specifiche di interfaccia. Le prestazioni effettive possono variare in base alla configurazione del sistema.
* Tutti i marchi ei loghi sono di proprietà dei rispettivi titolari.
* A causa dell'architettura standard del PC, una certa quantità di memoria è riservata al sistema e quindi la capacità di memoria reale è inferiore a quella dichiarata.
* Le prestazioni pubblicate si basano su valori massimi teorici fornite dai rispettivi fornitori di chipset o organizzazione che hanno definito le specifiche di interfaccia. Le prestazioni effettive possono variare in base alla configurazione del sistema.
* Tutti i marchi ei loghi sono di proprietà dei rispettivi titolari.
* A causa dell'architettura standard del PC, una certa quantità di memoria è riservata al sistema e quindi la capacità di memoria reale è inferiore a quella dichiarata.