Consumer Enterprise
  1. Home
  2. Consumer
  3. Motherboard
  4. GA-N3050N GSM PLUS

GA-N3050N GSM PLUS (Rev. 1.0)

Intel® Celeron™ N3050
OverviewSpecificationsSupportWhere to Buy

Specifications

  • CPU
    1. Built in with an Intel® Dual-Core Celeron® N3050 SoC (1.6 GHz)
      * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components.
    2. TDP 6W
    3. L1/L2 varies with CPU
  • Memory
    1. 2 x DDR3L DIMM sockets supporting up to 8 GB of system memory
      * If only one memory module is to be installed, be sure to install it in the SODIMM1 socket.
    2. Dual channel memory architecture
    3. Support for DDR3L 1333/1600 MHz memory modules
      * Due to an SoC limitation, if a 1333 MHz memory is installed, it will be downgraded to 1066 MHz.
    4. Support for non-ECC memory modules
    (Please refer "Memory Support List" for more information.)
  • Onboard Graphics
  • Integrated in the SoC:
    1. 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
    2. 1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz
  • Audio
    1. Realtek® ALC269 codec
    2. High Definition Audio
    3. 2-channel
  • LAN
    1. Realtek® RTL8111HS GbE LAN chip (10/100/1000 Mbit)
  • Expansion Slots
    1. 1 x PCI Express x1 slot
    2. 1 x Mini PCIe slot (half size) (MIN_PCIE)
      (The PCI Express slots conform to PCI Express 2.0 standard.)
  • Storage Interface
  • Integrated in the SoC:
    1. 2 x SATA 6Gb/s connectors
      * The M.2 slot shares bandwidth with the SATAIII_1 connector. The SATAIII_1 connector becomes unavailable when an M.2 SSD is installed. ŠŠ
    1 x M.2 slot (B/M key, type 2242 SATA and PCIe x1 SSD support) (M2_M)
  • USB
  • Integrated in the SoC:
    1. 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
    2. 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through the internal USB header)
  • Internal I/O Connectors
    1. 1 x 4-pin ATX 12V power connector
    2. 1 x CPU fan header
    3. 1 x system fan header
    4. 1 x front panel header
    5. 1 x front panel audio header
    6. 2 x SATA 6Gb/s connectors
    7. 1 x M.2 slot
    8. 1 x SATA power connector
    9. 1 x battery cable header
    10. 1 x USB 3.0/2.0 header
    11. 1 x USB 2.0/1.1 header
    12. 1 x Trusted Platform Module (TPM) header
    13. 4 x serial port headers
    14. 1 x COM1 function select jumper
    15. 1 x parallel port header
    16. 1 x LVDS header
    17. 1 x LCD inverter connector
    18. 1 x Clear CMOS jumper
  • Back Panel Connectors
    1. 1 x DC In power connector
    2. 2 x serial ports
    3. 1 x D-Sub port
    4. 1 x HDMI port
    5. 4 x USB 2.0/1.1 ports
    6. 2 x USB 3.0/2.0 ports
    7. 1 x RJ-45 port
    8. 3 x audio jacks (Line In, Line Out, Mic In)
  • I/O Controller
    1. iTE® I/O Controller Chip
  • H/W Monitoring
    1. System voltage detection
    2. CPU/System temperature detection
    3. CPU/System fan fail warning
    4. CPU/System fan speed detection
    5. CPU/System fan speed control
      * Whether the fan speed control function is supported will depend on the cooler you install.
  • BIOS
    1. 1 x 64 Mbit flash
    2. Use of licensed AMI UEFI BIOS
    3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
  • Operating System
    1. Support for Windows 10 32-bit/64-bit
    2. Support for Windows 8.1/7 64-bit
      * Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7.
  • Form Factor
    1. Mini-ITX Form Factor; 17.0cm x 17.0cm
  • Remark
    1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
    2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.
    • CPU
      1. Built in with an Intel® Dual-Core Celeron® N3050 SoC (1.6 GHz)
        * Do not disassemble the onboard SoC and the heatsinks by yourself to avoid damage to these components.
      2. TDP 6W
      3. L1/L2 varies with CPU
    • Memory
      1. 2 x DDR3L DIMM sockets supporting up to 8 GB of system memory
        * If only one memory module is to be installed, be sure to install it in the SODIMM1 socket.
      2. Dual channel memory architecture
      3. Support for DDR3L 1333/1600 MHz memory modules
        * Due to an SoC limitation, if a 1333 MHz memory is installed, it will be downgraded to 1066 MHz.
      4. Support for non-ECC memory modules
      (Please refer "Memory Support List" for more information.)
    • Onboard Graphics
    • Integrated in the SoC:
      1. 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
      2. 1 x HDMI port, supporting a maximum resolution of 3840x2160@30 Hz
    • Audio
      1. Realtek® ALC269 codec
      2. High Definition Audio
      3. 2-channel
    • LAN
      1. Realtek® RTL8111HS GbE LAN chip (10/100/1000 Mbit)
    • Expansion Slots
      1. 1 x PCI Express x1 slot
      2. 1 x Mini PCIe slot (half size) (MIN_PCIE)
        (The PCI Express slots conform to PCI Express 2.0 standard.)
    • Storage Interface
    • Integrated in the SoC:
      1. 2 x SATA 6Gb/s connectors
        * The M.2 slot shares bandwidth with the SATAIII_1 connector. The SATAIII_1 connector becomes unavailable when an M.2 SSD is installed. ŠŠ
      1 x M.2 slot (B/M key, type 2242 SATA and PCIe x1 SSD support) (M2_M)
    • USB
    • Integrated in the SoC:
      1. 4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
      2. 6 x USB 2.0/1.1 ports (4 ports on the back panel, 2 ports available through the internal USB header)
    • Internal I/O Connectors
      1. 1 x 4-pin ATX 12V power connector
      2. 1 x CPU fan header
      3. 1 x system fan header
      4. 1 x front panel header
      5. 1 x front panel audio header
      6. 2 x SATA 6Gb/s connectors
      7. 1 x M.2 slot
      8. 1 x SATA power connector
      9. 1 x battery cable header
      10. 1 x USB 3.0/2.0 header
      11. 1 x USB 2.0/1.1 header
      12. 1 x Trusted Platform Module (TPM) header
      13. 4 x serial port headers
      14. 1 x COM1 function select jumper
      15. 1 x parallel port header
      16. 1 x LVDS header
      17. 1 x LCD inverter connector
      18. 1 x Clear CMOS jumper
    • Back Panel Connectors
      1. 1 x DC In power connector
      2. 2 x serial ports
      3. 1 x D-Sub port
      4. 1 x HDMI port
      5. 4 x USB 2.0/1.1 ports
      6. 2 x USB 3.0/2.0 ports
      7. 1 x RJ-45 port
      8. 3 x audio jacks (Line In, Line Out, Mic In)
    • I/O Controller
      1. iTE® I/O Controller Chip
    • H/W Monitoring
      1. System voltage detection
      2. CPU/System temperature detection
      3. CPU/System fan fail warning
      4. CPU/System fan speed detection
      5. CPU/System fan speed control
        * Whether the fan speed control function is supported will depend on the cooler you install.
    • BIOS
      1. 1 x 64 Mbit flash
      2. Use of licensed AMI UEFI BIOS
      3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
    • Operating System
      1. Support for Windows 10 32-bit/64-bit
      2. Support for Windows 8.1/7 64-bit
        * Please download the "Windows USB Installation Tool" from GIGABYTE's website and install it before installing Windows 7.
    • Form Factor
      1. Mini-ITX Form Factor; 17.0cm x 17.0cm
    • Remark
      1. Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
      2. Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.

      * The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
      * The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
      * Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
      * All trademarks and logos are the properties of their respective holders.
      * Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.

      Support