When I install Windows NT 4.0, system couldn’t detect the Hard Disk and show the installation fail.

Modelo Relacionado ( 1 )

Because our SR-101 server use IDE-RAID controller, so when install Windows NT you must follow the following procedure.

(1)	Use Windows NT CD, boot from the CD-ROM. When appear Windows NT Setup screen, press "F6" immediately.
(2)	When the “Windows NT Setup “ window is generated, press “S” to specify an additional Device.
(3)	Insert the Driver diskette into driver A: and press “Enter” key.
(4)	Choose “Win NT FastTrak100-Lite Controller “ from the list that appears on screen, and press the “Enter” key.
(5)	The Windows NT Setup screen will appear again saying, “Setup will load support for the following mass storage devices:” The list will include “ WinNT FastTrak100-Lite controller “.
(6)	From the Windows NT Setup screen, press the Enter key. Setup will now load all device files, and continue the Windows NT installation.

Servicio al cliente

Soporte en línea

Para comprobar el estado de los tickets existentes, por favor ingrese esupport.gigabyte.com

Contacto