GIGABYTE SSD 2TB
GSSD2000G
Specifications
- Interface
- SATA 6.0Gb/s
- Form Factor
- 2.5-inch internal SSD
- Total Capacity
- 2000GB
- External DDR Cache
- N/A
- Sequential Read speed
- Up to 550 MB/s
- Sequential Write speed
- Up to 510 MB/s
- Dimension
- 69.85 x 7 x 100 mm
- Mean time between failure (MTBF)
- 2 million hours
- Power Consumption (Active)
- R : 1460mW; W : 1400mW
- Power Consumption (Idle)
- 250mW
- Temperature (Operating)
- 0°C to 70°C
- Temperature (Storage)
- -40°C to 85°C
- Warranty
- 1. Limited 5-years or 600TBW
- 2. Limited warranty based on 5 years or 600TBW, whichever comes first.
*TBW (Terabyte Written):Terabytes Written is the total amount of data that can be written into an SSD before it is likely to fail. - 3. The "percentage of SSD life" (SMART ID: E7 or A9) in SMART page of the "GIGABYTE SSD toolbox" program will be used as the determining criteria when the number is 0 means out of warranty. (A new unused product will show the percentage of 100.)
- Note
- • Test system configuration: configuration may vary by models; we will choose the latest platform for verification.
- • Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
- • Speeds based on internal testing. Actual performance may vary.
- • 1GB = 1 billion bytes. Actual useable capacity may vary.
- Interface
- SATA 6.0Gb/s
- Form Factor
- 2.5-inch internal SSD
- Total Capacity
- 2000GB
- External DDR Cache
- N/A
- Sequential Read speed
- Up to 550 MB/s
- Sequential Write speed
- Up to 510 MB/s
- Dimension
- 69.85 x 7 x 100 mm
- Mean time between failure (MTBF)
- 2 million hours
- Power Consumption (Active)
- R : 1460mW; W : 1400mW
- Power Consumption (Idle)
- 250mW
- Temperature (Operating)
- 0°C to 70°C
- Temperature (Storage)
- -40°C to 85°C
- Warranty
- 1. Limited 5-years or 600TBW
- 2. Limited warranty based on 5 years or 600TBW, whichever comes first.
*TBW (Terabyte Written):Terabytes Written is the total amount of data that can be written into an SSD before it is likely to fail. - 3. The "percentage of SSD life" (SMART ID: E7 or A9) in SMART page of the "GIGABYTE SSD toolbox" program will be used as the determining criteria when the number is 0 means out of warranty. (A new unused product will show the percentage of 100.)
- Note
- • Test system configuration: configuration may vary by models; we will choose the latest platform for verification.
- • Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark and IOmeter 1.1.0.
- • Speeds based on internal testing. Actual performance may vary.
- • 1GB = 1 billion bytes. Actual useable capacity may vary.
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.