S453-S70

(rev. AAV1)

4U
482.6 x 177 x 625

5th Generation Intel^® Xeon^® Scalable Processors
4th Generation Intel^® Xeon^® Scalable Processors
Dual processor, CPU TDP up to 270W

Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable

2 x LGA 4677
Socket E

Intel^® C741 Chipset

16 x DIMM slots
DDR5 memory supported only
8-Channel memory architecture
RDIMM modules up to 96GB supported*

5th Gen Intel^® Xeon^®: Up to 5600MHz
4th Gen Intel^® Xeon^®: Up to 4800MHz

*Total memory supports up to 512GB with 1600W power supply. Please select 2000W power supply for higher memory configuration.

Rear side:
2 x 10Gb/s LAN ports (1 x Intel^® X710-AT2)
2 x 1GbE LAN ports (2 x Intel^® I210-AT)
NCSI function supported (by switch setting)

1 x 10/100/1000 management LAN

Integrated in Aspeed^® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp, DDR4 SDRAM

Front side:
24 x 3.5"/2.5" SATA/SAS hot-swappable bays, connected to expander

Rear side:
12 x 3.5"/2.5" SATA/SAS hot-swappable bays, connected to expander
2 x 2.5" SATA/SAS bays for boot drives, from onboard connector
- (Additional SAS card is required for SAS support on boot drives)

1 x Broadcom SAS35x48 expanders
Bandwidth: SATA 6Gb/s or SAS 12Gb/s per port

SAS card is required to enable the drive bays

Recommended SAS cards:
CSA4710
CRA4760
CRA4761

Supported

Depends on SAS add-on Card

6 x PCIe x16 (Gen5 x16) low-profile slots

2 x M.2 slots:
- M-key
- PCIe Gen4 x4, from CPU_0
- Supports 2280/22100 cards

1 x TPM header
1 x VROC connector

2 x USB 3.2 Gen1
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x HDD status LED
1 x System status LED

2 x USB 3.2 Gen1
1 x VGA
1 x COM
4 x RJ45
1 x MLAN
1 x ID button with LED

Speed and bandwidth:
Front side - CBPD4O0: SATA 6Gb/s or SAS 12Gb/s
Rear side - CBP2021: SATA 6Gb/s or SAS 12Gb/s
Rear side - CBPD0C0: SATA 6Gb/s or SAS 12Gb/s

1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010

Dual 1600W 80 PLUS Titanium redundant power supply

AC Input:
- 100-127V~/ 12A, 50-60Hz
- 200-240V~/ 10A, 50-60Hz

DC Input:
- 240Vdc/ 8A

DC Output:
- Max 1000W/ 100-127V~
+ 12.2V/ 82A
+ 12.2Vsb/ 3A
- Max 1600W/ 200-240V~ or 240Vdc Input
+ 12.2V/ 132A
+ 12.2Vsb/ 3A

Aspeed^® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

• Dashboard
• HTML5 KVM
• Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
• Sensor Reading History Data
• FRU Information
• SEL Log in Linear Storage / Circular Storage Policy
• Hardware Inventory
• Fan Profile
• System Firewall
• Power Consumption
• Power Control
• Advanced power capping
• LDAP / AD / RADIUS Support
• Backup & Restore Configuration
• Remote BIOS/BMC/CPLD Update
• Event Log Filter
• User Management
• Media Redirection Settings
• PAM Order Settings
• SSL Settings
• SMTP Settings

Please refer to OS compatibility table in support page

4 x 80x80x38mm (16,300rpm)
4 x 80x80x38mm (9,000rpm)

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

843 x 610 x 290 mm

1 x S453-S70
2 x CPU heatsinks
6 x Carrier clips
1 x 3-Section Rail kit

- Barebone package (4th/5th Gen): 6NS453S70MR000ABV1*
- Barebone package (4th Gen): 6NS453S70MR000AAV1*
- Motherboard: 9MS73HB0NR-000
- 3-Section Rail kit: 25HB2-3A6104-I0R
- CPU heatsink: 25ST1-323208-A0R
- Backplane board - CBP2021: 9CBP2021NR-00
- Backplane board - CBPD0C0: 9CBPD0C0NR-00
- Backplane board - CBPD4O0: 9CBPD4O0NR-00
- Fan module: 25420-8038B-D00R
- Fan module: 25ST2-883829-D0R
- 1600W power supply: 25EP0-21600D-G1S

Optional parts:

- 2000W power supply (GosPower): 25EP0-22000L-G1S
- 2000W power supply (LITEON): 25EP0-22000M-L0S