When I install Windows 2000, I didn’t see the Hard Disk and install fail.

Related Model ( 1 )

Because our SR-101 server use the IDE-RAID controller, so when install Windows 2000 you must follow the following procedure.

(1)	Use Windows-2000 CD, boot from the CD-ROM. Press F6 after the message " Press F6 if you need to install third party SCSI or RAID driver " appears.
(2)	When the "Windows 2000 Setup" window is generated, press "S" to specify an additional Device.
(3)	Insert the Driver diskette into driver A: and press "Enter" key.
(4)	Please choose "Win2000 FastTrak100-Lite Controller" from the list that appears on screen, and press the "Enter" key.
(5)	The Windows 2000 setup screen will appearagain saying, "Setup will load support for the following mass storage devices:" The list will include "Win2000 FastTrak100-Lite controller".
(6)	From the Windows 2000 Setup screen, press the Enter key. Setup will now load all device files. And continue the Windows 2000 installation.

Customer Service

Online Support

To check the status of existing tickets, please login esupport.gigabyte.com

Contact