GS-R22PHLLegacy | Software updates supported

2U
482mm x 86mm x 871mm (DxHxW)

GA-7PPSP

Supports:

• Intel^® Xeon^® E5-2600 V2 processors
• Intel^® Xeon^® E5-1600 V2 processors (single CPU configuration only)
• Intel^® Xeon^® E5-2600 processors
• Intel^® Xeon^® E5-1600 processors (single CPU configuration only)

2 x LGA 2011
Mounting pitch: narrow ILM (56x94mm)
Max. length of M4 screw threads: 3.7mm
Screws longer than 3.7mm might damage the motherboard

Intel^® C602

16 x DIMM slots
Quad channel memory architecture
ECC & non-ECC UDIMM/RDIMM modules supported
Single and dual rank UDIMM modules up to 8GB supported
Single, dual and quad rank RDIMM modules up to 32GB supported
1.35V modules: 1066/1333/(1600*) MHz
1.5V modules: 1066/1333/1600/(1866*) MHz

*Supported by Intel^® Xeon^® E5-2600 V2 processors only

Download the detailed memory configuration table for the E5-1600/2600 V2 processors
Download the detailed memory configuration table for the E5-1600/2600 processors

2 x 10GbE BASE-T ports (Intel^® X540)
1 x 10/100 management LAN
GC-MLBZ1 network card in option:

• 2 x 10GbE SFP+ ports (Broadcom^® BCM57810S)
• PCIe 2.0 x8 connector
• 145 x 68.9 mm

Integrated in Aspeed^® AST2300
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp

8 x 2.5" hot-swappable HDD/SSD bays

2 x SATA III 6Gb/s ports
4 x SATA II 3Gb/s ports
4 x SATA II 3Gb/s ports (can be upgraded via Intel^® upgrade key)

GC-MSLZ1 expansion card in option:

• 2 x Mini-SAS (for 8 x SAS 6Gb/s ports)
• LSI^® SAS2208 controller
• Hardware RAID 0/1/5/6/10/50/60
• Hardware RAID 5/6 XOR Engine (single pass)
• Low profile PCIe 2.0 x8 mezzanine connector
• 76.8 x 98 mm

Intel^® SATA RAID 0/1/5/10

-

8 x PCIe x16 (Gen3 x16 bus) slots supporting:

• 8 x Intel^® Xeon Phi 7120P cards
• 8 x Intel^® Xeon Phi 5110P cards
• 8 x Nvidia^® Tesla K40 cards
• 8 x Nvidia^® Tesla K20 cards
• 8 x Nvidia^® Tesla K10 cards
• 8 x AMD^® FirePro S9150 cards

1 x Half-length low-profile slot
1 x PCIe x16 (Gen3 x8 bus) connector
1 x Proprietary PCIe x8 (Gen3 x4 bus) mezzanine connector

1 x Front VGA header
1 x Front serial port header
1 x IPMB connector
2 x SATA III 6Gb/s ports
4 x SATA II 3Gb/s ports
4 x SATA/SAS 3Gb/s ports
1 x SATA SGPIO header
1 x SAS SGPIO header
1 x USB 2.0 header
1 x BIOS write protect jumper
1 x ME recovery jumper
1 x 18-pin SSI main power connector
2 x 14-pin ATX power connectors
1 x Front panel header (primary)
1 x Front panel header (secondary)
1 x HDD/SSD back plane board header
1 x PMBus Power Select jumper
1 x CMOS battery
1 x Clear CMOS jumper
1 x BMC firmware readiness LED
1 x Patsburg upgrade ROM header
1 x TPM header
1 x Force to Stop FRB Timer jumper
1 x S3 Power On Select jumper
1 x Chassis intrusion header
1 x BIOS recovery jumper
1 x Clearing Supervisor Password jumper

1 x Power button with LED
1 x ID button with LED
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
1 x Reset button

2 x USB 2.0
1 x VGA
1 x Serial
3 x RJ45
1 x Power button
1 x Reset button
1 x ID button
1 x NMI button
1 x System status LED

N/A

1 x TPM header

2 x 1600W redundant PSU
80 PLUS Platinum

AC input:
- 100-127V/ 12.9A, 47-63Hz
- 200-240V/9.5A, 47-63Hz

DC output:
- 1000W@100-127V
- 1600W@200-240V

Aspeed^® AST2300 management controller
Avocent^® MergePoint IPMI 2.0 web interface:

• Network settings
• Network security settings
• Users control
• Services settings
• IPMI settings
• Sessions control
• LDAP settings
• Power control
• Voltages, fans and temperatures monitoring
• System event log
• Events management (platform events, trap settings, email settings)
• Serial Over LAN
• vKVM & vMedia (launch, configuration)

Red Hat Enterprise Linux 6.2 (x86/x64)

SUSE Linux Enterprise Server 11.2 (x86/x64)

8 x 80x80x38mm (15000rpm)

Operating temperature: 10°C to 35°C
ŠNon-operating temperature: -40°C to 60°C
10-80% operating humidity (non-condensing)

N/A

Barebone without rail kit: 6NR22PHLMS-00
Barebone with rail kit: 6NR22PHLMS-SI
Rail kit: 25HB2-A86100-K0R