S260-NF0

Discontinued

2U NVMe Over Fabric Storage
  • Western Digital Onyx NVMe Over Fabric storage controller
  • Fully supports iWARP, RoCE v1 and v2
  • Dual controller architecture
  • 1 x 100Gb/s or 2 x 50Gb/s Ethernet port(s) via QSFP28 interface
  • 1 x AST2520 management port per node
  • 24 x 2.5" NVMe hot-swappable bays
  • 3 x PCIe Gen3 x16 slots per node
  • Dual 800W 80 PLUS Platinum redundant power supply
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.

SPECIFICATIONS

Dimensions (WxHxD, mm)
2U
440 x 87 x 695
Motherboard
2 x CPBD530
Embedded Microsemi PM8536B-FEI PICe switch with 96 Lanes
Pre-installed 1 x Western Digital Onyx NVMe Host Bus Adapter* in each CPBD530
Each CPBD530 board controls 12 x NVMe SSD devices with PCIe x4 bandwidth per port

*NOTE: Up to 3 x Western Digital Onyx NVMe Host Bus Adapters on each CPBD530 board
CPU
Western Digital Onyx NVMeOF Bridge ASIC
Socket
Embedded
Chipset
N/A
Memory
N/A
LAN
Rear side:
1 x 100Gb/s or 2 x 50Gb/s Ethernet port(s) via QSFP28 interface
1 x 10/100/1000 management LAN
Video
Integrated in Aspeed® AST2520
Storage
Front side:
24 x 2.5" NVMe hot-swappable bays
SATA
N/A
SAS
N/A
RAID
N/A
Expansion Slots
Per node:
Total 3 x PCIe Gen3 x16 slots for Western Digital Onyx NVMeOF HBAs per node
- 2 x PCIe x16 (Gen3 x16) full-height slots
- 1 x PCIe x16 (Gen3 x16) low-profile slot
Internal I/O
N/A
Front I/O
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x System status LED
Rear I/O
1 x QSFP28
1 x MLAN
1 x Serial port
1 x Power button with LED
1 x ID button with LED
1 x BMC Reset button
1 x System Reset button
1 x System status LED
Backplane Board
Speed and bandwidth:
PCIe Gen3 x4
TPM
N/A
Power Supply
2 x 800W 80 PLUS Platinum redundant power supplies

AC Input:
- 100-240V~/ 10-4A, 50-60Hz

DC Input:
- 240Vdc/ 4.5A

DC Output:
- Max 800W
+ 12V/ 66A
+ 12Vsb/ 2.5A
System Management
Aspeed® AST2520 management controller
OS Compatibility
N/A
System Fans
4 x 80x80x38mm (16,300rpm)
Operating Properties
Operating temperature: 10°C to 35°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
Weight
Net Weight: 17 kg
Gross Weight: 28.8 kg
Packaging Dimensions
1038 x 697 x 311 mm
Packaging Content
1 x S260-NF0
1 x Rail kit
Part Numbers
- Barebone package: 6NS260NF0MR-00-1*
- Controller board: 9CPBD530NR-00
- NVMeOF bridge controller: 25FCZ-ONYX20-M9R
- Rail kit: 25HB2-AN6103-K0R
- Front panel board - CFPH004: 9CFPH004NR-00
- Backplane board - CBPD0O1: 9CBPD0O1NR-00
- Fan module: 25ST2-88382A-D0R
- Riser card - CRSD020: 9CRSD020NR-00
- Power supply: 25EP0-208004-L0S
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at anytime without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.

SUPPORT

RESOURCES

Back to S260-NF0
{{ selectedProductCount }}
Compare
  • Add more
    {{ selectedProducts[index].modelName }}
Clear All
Back
You may only add up to 4 items for comparison at one time.