Preguntas frecuentes
     

    SuSE 7.1 / 7.2 Installation Guide for SR101

    Modelo Relacionado ( 1 )

    [Prepare for Installation]
    1.1How to make the Promise Diskettes
    Boot Diskette – Get utility “rawrite.exe” from SuSE disk 1, and extract boot.img to diskette by “rawrite.exe” on DOS-based PC.Driver Diskette – Extract driver7x.tgz by issuing “tar” command. Driver 71.tgz and driver72.tgz are for SuSE 7.1/7.2 individually.
    [Installation]
    2.1Install the FastTrak Series Linux Driver into a NEW SYSTEM
    2.1.1Start the SuSE Install by booting with the “Promise Boot Diskette”
    2.1.2At the “>>> SuSE Linux 7.x <<<” installation screen, a prompted labeled “boot:” will appear at the bottom of the screen. At the prompt press the left “Alt” key.
    2.1.3Syslinux prompts the user for a “Please insert the Driver Update floppy…”. Please insert the “Promise Driver Diskette”.
    2.1.4Continue with the installation as normal. (NOTE 3.1)
    2.1.5At the “Now booting your system” dialog box prompted, please press Alt-Ctrl-F2 and insert “Promise Driver Diskette” in the floppy drive.
    2.1.6Issue commands to setup FastTrak Series Linux Driver, # chroot /mnt # mount /dev/fd0 /floppy # cd /floppy # ./setup71-ft (or “./setup72-ft” for SuSE 7.1/7.2 individually).
    2.1.7PressAlt-Ctrl-F7 and continue with the installation as normal.
    2.1.8After installation has completed, please re-boot system once.
    [NOTE]
    3.1When “Custom LILO installation” installation screen was shown, it is recommended to enable “use the ‘linear’ option” for FastTrak adapter.
    3.2In order to solve the hang up problem during the installation, the BIOS version of 6VXDR7 must be F3 or later version.
    Servicio al cliente
    Soporte en línea
    Para comprobar el estado de los tickets existentes, por favor ingrese esupport.gigabyte.com
    Contacto