R283-P93

(rev. AAL1)

2U
438 x 87.5 x 815

MP93-FS0

AmpereOne™ Family
Dual processor, 5nm technology
Up to 192 custom cores per processor
TDP up to 400W

Note: If only 1 CPU is installed, some PCIe or memory functions might be unavailable.

2 x LGA 5964

System on Chip

32 x DIMM slots
DDR5 memory supported only
8-Channel memory architecture
ECC RDIMM up to 512GB supported
Memory speed: Up to 4800 MT/s

Rear side:
2 x 1Gb/s LAN ports (1 x Intel^® I350-AM2)
Support NCSI function

1 x 10/100/1000 Mbps management LAN

Integrated in Aspeed^® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp

Front side:
4 x 3.5"/2.5" Gen4 NVMe/SATA/SAS hot-swappable bays
8 x 3.5"/2.5" SATA/SAS hot-swappable bays
- (NVMe from CPU_1, SATA from CPU_1)

SAS card is required for SAS devices support

Depends on SAS add-on card

N/A

Riser Card CRS101J:
- 1 x PCIe x16 (Gen5 x16) FHHL slot, from CPU_0

Riser Card CRS101K:
- 1 x PCIe x16 (Gen5 x16) FHHL slot, from CPU_1

Riser Card CRS202G:
- 1 x PCIe x16 (Gen5 x16) FHFL slot, from CPU_0

Riser Card CRS202H:
- 1 x PCIe x16 (Gen5 x16) FHFL slot, from CPU_1

Riser Card CRS2018 x 2:
- 1 x PCIe x16 (Gen5 x16) low-profile slot, from CPU_0
- 1 x PCIe x16 (Gen5 x16) low-profile slot, from CPU_1

1 x OCP 3.0 slot with PCIe Gen5 x16 bandwidth, from CPU_0
Supports NCSI function

1 x OCP 3.0 slot with PCIe Gen5 x16 bandwidth, from CPU_1
Supports NCSI function

1 x M.2 slot:
- M-key
- PCIe Gen5 x4
- Supports 2280/22110 cards

1 x M.2 slot
1 x TPM header
2 x OCP 3.0 slots

2 x USB 3.2 Gen1
1 x Power button with LED
1 x ID button with LED
1 x Reset button
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED

2 x USB 3.2 Gen1
1 x Mini-DP
2 x RJ45
1 x MLAN
1 x ID LED

Speed and bandwidth:
PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s

1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010

1+1 2700W 80 PLUS Titanium redundant power supplies

AC Input:
- 100-127V~/ 12A, 50-60Hz
- 200-240V~/ 16A, 50-60Hz

DC Input:
- 240Vdc/ 16A

DC Output:
- Max 1008W/ 100-127V~
+ 12V/ 84A
+ 12Vsb/ 3A
- Max 2700W/ 200-240V~ or 240Vdc Input
+ 12V/ 225A
+ 12Vsb/ 3A

NOTE: The system power supply requires C19 power cord

Aspeed^® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

• Dashboard
• HTML5 KVM
• Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
• Sensor Reading History Data
• FRU Information
• SEL Log in Linear Storage / Circular Storage Policy
• Hardware Inventory
• Fan Profile
• System Firewall
• Power Consumption
• Power Control
• Advanced power capping
• LDAP / AD / RADIUS Support
• Backup & Restore Configuration
• Remote BIOS/BMC/CPLD Update
• Event Log Filter
• User Management
• Media Redirection Settings
• PAM Order Settings
• SSL Settings
• SMTP Settings

Please refer to OS compatibility table in support page

4 x 80x80x38mm (18,300rpm)

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

1077 x 679 x 300 mm

1 x R283-P93-AAL1
2 x CPU heatsinks
1 x Mini-DP to D-Sub cable
1 x 2-Section Rail kit

- Barebone package: 6NR283P93DR000AAL1*
- Motherboard: 9MP93FS0UR-000
- 2-Section Rail kit: 25HB2-3A0206-K0R
- CPU heatsink: TBD
- M.2 heatsink: 12SP2-11000E-00R (TBD)
- Front panel board - CFP2001: 9CFP2001NR-00
- Backplane board - CBP20C5: 9CBP20C5NR-00
- Fan module: 25ST2-88382T-S1R
- Riser card - CRS101J: 9CRS101JNR-00
- Riser card - CRS101K: 9CRS101KNR-00
- Riser card - CRS202G: 9CRS202GNR-00
- Riser card - CRS202H: 9CRS202HNR-00
- Riser card - CRS2018: 9CRS2018NR-00
- G-SCM board - CDCR115: 9CDCR115UR-00
- Mini-DP to D-Sub cable: 25CRN-200801-K1R (TBD)
- Power supply module: 25EP0-227000-D0S

Optional parts:

- C19 power cord 125V/15A (US): 25CP1-018000-Q0R
- C19 power cord 250V/16A (EU): 25CP3-01830H-Q0R
- 3-Section Rail kit: 25HB2-A56121-K0R
- Cable Management Arm: 25HB1-R18300-K0R