R263-Z33

(rev. AAF1)

2U
438 x 87.5 x 710

MZ33-DC0

AMD EPYC™ 9004 Series processors
AMD EPYC™ 9004 Series processors with AMD 3D V-Cache™ Technology
Single processor, 5nm technology
*Up to 128 cores, 256 threads per processor
cTDP up to 300W at ambient 35°C

*cTDP supported up to 400W under limited thermal conditions. Please contact technical support for more details.

1 x LGA 6096
Socket SP5

System on Chip

12 x DIMM slots
DDR5 memory supported only
12-Channel memory architecture
RDIMM modules up to 96GB supported
3DS RDIMM modules up to 256GB supported
Memory speed: Up to 4800 MHz

Rear side:
1 x 1Gb/s LAN port (1 x Intel^® I210-AT)
Supports NCSI function

1 x 10/100/1000 Mbps Management LAN

Integrated in Aspeed^® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp

Front side:
8 x 3.5"/2.5" Gen4 NVMe/SATA/SAS hot-swappable bays
4 x 3.5"/2.5" SATA/SAS hot-swappable bays

SAS card is required for SAS devices support

Depends on SAS add-in card

N/A

Riser Card CRS201H:
- 1 x PCIe x16 (Gen5 x16) FHFL slot, for GPUs

Riser Card CRS201M:
- 1 x PCIe x16 (Gen5 x16) FHFL slot, for GPUs

Riser Card CRS2018:
- 1 x PCIe x16 (Gen4 x16) FHHL slot

2 x OCP 3.0 slots with PCIe Gen5 x16 bandwidth
Support NCSI function

1 x M.2 slot:
- M-key
- PCIe Gen3 x4
- Supports 2280/22110 cards

*Please refer to optional parts for H100/A100/MI210 power cables.
1x 350/360mm + 1x 480/490mm configuration is recommended.

1 x TPM header

2 x USB 3.2 Gen1
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x Reset button
2 x LAN activity LEDs (1 x LED disabled)
1 x Storage activity LED
1 x System status LED

2 x USB 3.2 Gen1
1 x Mini-DP
1 x RJ45
1 x MLAN
1 x ID button with LED

Speed and bandwidth:
PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s

1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010

1+1 2400W 80 PLUS Platinum redundant power supplies

AC Input:
- 100-127V~/ 12.5A, 47-63Hz
- 180-200V~/ 14.5A, 47-63Hz
- 200-240V~/ 14.5A, 47-63Hz

DC Input: (Only for China)
- 240Vdc/ 12A

DC Output:
- Max 1000W/ 100-127V~
+ 12V/ 84A
+ 12Vsb/ 3A
- Max 2200W/ 180-200V~
+ 12V/ 180A
+ 12Vsb/ 3A
- Max 2400W/ 200-240V~ or 240Vdc Input
+ 12V/ 197A
+ 12Vsb/ 3A

Note:
1. The system power supply requires C19 power cord.
2. The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.

Aspeed^® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

• Dashboard
• HTML5 KVM
• Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
• Sensor Reading History Data
• FRU Information
• SEL Log in Linear Storage / Circular Storage Policy
• Hardware Inventory
• Fan Profile
• System Firewall
• Power Consumption
• Power Control
• Advanced power capping
• LDAP / AD / RADIUS Support
• Backup & Restore Configuration
• Remote BIOS/BMC/CPLD Update
• Event Log Filter
• User Management
• Media Redirection Settings
• PAM Order Settings
• SSL Settings
• SMTP Settings

Please refer to OS compatibility table in support page

4 x 80x80x38mm (18,300rpm)

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

989 x 594 x 279 mm

1 x R263-Z33
1 x CPU heatsink
1 x Mini-DP to D-Sub cable
1 x 2-Section Rail kit

- Barebone package: 6NR263Z33DR000AAF1*
- Motherboard: 9MZ33DC0UR-000
- 2-Section Rail kit (CMA not supported): 25HB2-3A0203-K0R
- CPU heatsink: 25ST1-553201-M1R
- M.2 heatsink: 12SP2-11000E-00R
- Front panel board - CFP2001: 9CFP2001NR-00
- Backplane board - CBP20C5: 9CBP20C5NR-00
- Fan module: 25ST2-88382T-S1R
- Riser card - CRS2018: 9CRS2018NR-00
- Riser card - CRS201H: 9CRS201HNR-00
- Riser card - CRS201M: 9CRS201MNR-00
- Mini-DP to D-Sub cable: 25CRN-200801-K1R
- GPU power cable (2x 6+2pin PCIe, 350mm): 25CRI-350305-Y4R
- GPU power cable (2x 6+2pin PCIe, 480mm): 25CRI-480300-Y4R
- Power supply: 25EP0-224000-D0S

Optional parts:

- C19 power cord 125V/15A (US): 25CP1-018000-Q0R
- C19 power cord 250V/16A (EU): 25CP3-01830H-Q0R
- C19 power cord 125V/15A (JP): 25CPA-01830B-Q0R
- 3-Section Rail kit (Supports CMA): 25HB2-A56121-K0R
- Cable Management Arm: 25HB1-R18300-K0R
- A100/MI210 power cable (8pin CPU, 350mm): 25CRI-350100-Y4R
- A100/MI210 power cable (8pin CPU, 480mm): 25CRI-480101-Y4R
- H100 power cable (12VHPWR, 360mm): 25CRI-360102-Y4R
- H100 power cable (12VHPWR, 490mm): 25CRI-490102-Y4R