E263-S30

(rev. AAV1)

2U
438 x 87.5 x 520

MS33-DC0

5th Generation Intel^® Xeon^® Scalable Processors
4th Generation Intel^® Xeon^® Scalable Processors
Intel^® Xeon^® CPU Max Series
Single processor, CPU TDP up to 350W

1 x LGA 4677
Socket E

Intel^® C741 Chipset

16 x DIMM slots
DDR5 memory supported only
8-Channel memory architecture
RDIMM modules up to 96GB supported
3DS RDIMM modules up to 256GB supported

5th Gen Intel^® Xeon^®: Up to *5600MHz (1DPC), 4400MHz (2DPC)
4th Gen Intel^® Xeon^®: Up to 4800MHz (1DPC), 4400MHz (2DPC)
Intel^® Xeon^® Max Series: Up to 4800MHz (1DPC), 4400MHz (2DPC)

*5600MHz support under 2DPC configuration requires verified memory and BIOS setup. Please refer to the QVL for more information.

Rear side:
1 x 1Gb/s LAN port (1 x Intel^® I210-AT)
Supports NCSI function

1 x 10/100/1000 Mbps Management LAN

Integrated in Aspeed^® AST2600
2D Video Graphic Adapter with PCIe bus interface
1920x1200@60Hz 32bpp

Rear Side:
2 x 2.5" Gen4 NVMe/SATA/SAS hot-swappable bays

SAS card is required for SAS devices support

Depends on SAS add-in card

Intel^® SATA RAID 0/1

Riser Card CRS201C:
- 1 x PCIe x16 (Gen5 x16) FHFL slot, from CPU, for GPUs

Riser Card CRS201D:
- 1 x PCIe x16 (Gen5 x16) FHFL slot, from CPU, for GPUs

2 x OCP 3.0 slots with PCIe Gen5 x16 bandwidth, from CPU
Support NCSI function

1 x M.2 slot:
- M-key
- PCIe Gen3 x4, from PCH
- Supports 2280/22110 cards

1 x TPM header
1 x VROC connector

2 x USB 3.2 Gen1
1 x Power button with LED
1 x ID button with LED
1 x NMI button
1 x Reset button
1 x LAN activity LED
1 x Storage activity LED
1 x System status LED

2 x USB 3.2 Gen1
1 x Mini-DP
1 x RJ45
1 x MLAN
1 x ID button with LED

Speed and bandwidth:
PCIe Gen4 x4 or SATA 6Gb/s or SAS 12Gb/s

1 x TPM header with SPI interface
Optional TPM2.0 kit: CTM010

1+1 1600W 80 PLUS Titanium redundant power supplies

AC Input:
- 100-240V~/ 12-9.5A, 50-60Hz

DC Input:
- 240Vdc/ 9.5A

DC Output:
- Max 1000W/ 100-127V~
+ 12.2V/ 82A
+ 12Vsb/ 3A
- Max 1600W/ 200-240V~ or 240Vdc Input
+ 12.2V/ 131.2A
+ 12Vsb/ 3A

Note: The default power supply is based on a basic system configuration. Please contact with technical representatives to determine the best power supply selection for your system configuration requirements and preferred efficiency.

Aspeed^® AST2600 management controller
GIGABYTE Management Console (AMI MegaRAC SP-X) web interface

• Dashboard
• HTML5 KVM
• Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
• Sensor Reading History Data
• FRU Information
• SEL Log in Linear Storage / Circular Storage Policy
• Hardware Inventory
• Fan Profile
• System Firewall
• Power Consumption
• Power Control
• Advanced power capping
• LDAP / AD / RADIUS Support
• Backup & Restore Configuration
• Remote BIOS/BMC/CPLD Update
• Event Log Filter
• User Management
• Media Redirection Settings
• PAM Order Settings
• SSL Settings
• SMTP Settings

Please refer to OS compatibility table in support page

Additional certifications:
Windows Server 2022

4 x 80x80x38mm (18,300rpm)

Operating temperature: 10°C to 35°C
Operating humidity: 8%-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)

Net Weight: 18 kg
Gross Weight: 21 kg

732 x 588 x 285 mm

1 x E263-S30
1 x CPU heatsink
1 x Mini-DP to D-Sub cable
3 x Carrier clips

*Rail kit not included. Please refer to optional parts for compatible rail kit.

- Barebone package (4th/5th Gen): 6NE263S30DR000ABV1*
- Barebone package (4th Gen): 6NE263S30DR000AAV1*
- Motherboard: 9MS33DC0UR-000
- CPU heatsink: 25ST1-4Z3200-S7R
- M.2 heatsink: 12SP2-11000E-00R
- Front panel board - CFP2001: 9CFP2001NR-00
- Backplane board - CBP2022: 9CBP2022NR-00
- Fan module: 25ST2-88382T-S1R
- Riser card - CRS201C: 9CRS201CNR-00
- Riser card - CRS201D: 9CRS201DNR-00
- Mini-DP to D-Sub cable: 25CRN-200801-K1R
- GPU power cable (6P+2P) 350mm: 25CRI-350305-Y4R
- GPU power cable (6P+2P) 480mm: 25CRI-480300-Y4R
- Power supply: 25EP0-21600E-L0S

Optional parts:

- 2-Section Rail kit: 25HB2-3A0204-K0R